East Sussex · England
Bath Re-enamelling in Town Row
Full bath re-enamelling and resurfacing at your home in Town Row, with a one-year guarantee on every repair.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
Bath re-enamelling in Town Row, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Typical jobs include a dull, rough surface that won’t come clean and stains that won’t shift, in cast iron baths, acrylic baths and basins & shower trays.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Town Row (TN6)
- County
- East Sussex
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Town Row
We carry out planned and one-off repairs for housing associations and facilities teams in East Sussex and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
For anyone letting property in or around Town Row, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. Allow most of the day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Open a window if you can
- Let the surface dry out before the visit
- Let us know about parking or access
Ask for a price
Most clients in Town Row get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
Our work in Town Row
Town Row is about 3 miles east of Crowborough, in East Sussex. Anywhere in TN6, we come to you. Town Row is one of 289 places in East Sussex we cover. Our jobs stretch from Town Row to London (about 34 miles away).
We work across TN6 and the streets around it. You’ll find streets such as Station Road, Station Close and Spout Hill. If you are just outside Town Row, we cover Rotherfield (1 mile south-west), High Cross (1 mile south), Argos Hill (1 mile south), Mark Cross (1 mile north-east) and Woolbridge (2 miles south). Within a short drive, we also cover Hailsham (13 miles south), Crowborough (3 miles west), Uckfield (8 miles south-west), South Malling (15 miles south-west), Heathfield (6 miles south) and Upper Horsebridge (12 miles south).
What’s near Town Row
Around Town Row, we work in homes near St Joseph Seminary, The King's Arms Public House and Rotherfield Primary School and the streets around them. The nearest railway station is Crowborough station, about 2 miles west of the centre. A little further out are Crowborough War Memorial Hospital (3.3 miles west). The countryside around Town Row includes Crowborough Country Park.
FAQs for Town Row
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Which areas do you work in?
We work UK-wide, so Town Row is covered. Our prices are the same everywhere.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across East Sussex.
Do you come to Town Row?
Yes. We work across the UK and travel to Town Row. Send us photos for a fixed quote, or call 0345 017 0787.
Nearby places to Town Row
Also in Town Row
Signs you need bath re-enamelling in Town Row
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Typical reasons for a call-out include:
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
- An old resurfacing that is failing
What to look for in a quote
- How to care for the finish
- How changes to the job are handled
- Whether the price covers travel
- How long the guarantee is and what it covers
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Dry the bath after use to stop limescale
- Avoid suction-cup mats
- Don’t let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What we can’t put right
We’ll always be straight with you, so here’s what a repair cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- What the surface is made of
- Previous DIY repairs that have to come out
- How many areas need work
- Whether we combine several jobs
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Quotes from your pictures
We price nearly every job from photos. This is what to send:
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- A photo taken from further back
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
