County Durham · England

Bath Re-enamelling for Townfield homes

Bath re-enamelling in and around Townfield: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Wear marks under the taps
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Townfield

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Bath re-enamelling in Townfield, done in place

Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. Whether it’s lots of chips and rust spots and an old resurfacing that’s failing, we can help, on pressed steel baths, Victorian roll-tops and basins & shower trays alike.

You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Technician in a mask working on a freestanding roll-top bath
Location
Townfield (DH8)
County
County Durham
Cover
12 months on all our work
Quote
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026

Why repair rather than replace?

A replacement often means several trades over several days. Re-enamelling is one technician, generally one day. Prices start from £350. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Townfield

  • Accredited with CHAS, Constructionline and SafeContractor
  • Honest advice, even when it means no job
  • Everything repaired in place
  • Free fixed quotes from pictures

Read our prices page or resurfacing vs replacement cost guide.

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

What a repair can’t fix

Before you book, it’s worth knowing the limits:

  • A bath that is rusted through
  • A metal bath with a through crack
  • Plumbing leaks, which need a plumber

Send us pictures and we will tell you honestly.

Surfaces we repair

  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths

Signs you need bath re-enamelling in Townfield

The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

Send us a picture if you notice any of these:

  • Worn patches where water runs and sits
  • Chips and rust in more than one place
  • Staining under the taps and around the waste
  • An original cast iron bath that needs restoring

What your quote should include

  • What happens if the damage is worse than the pictures show
  • What aftercare is recommended
  • Whether the price is fixed and includes VAT
  • What the guarantee covers, and for how long

How to compare quotes

The process

We begin by going over the job with you, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. It normally takes most of the day, and we will keep you posted as we go.

  1. We mask and protect the room and ventilate it.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. We spray several coats of new enamel finish.
  5. We leave it to cure, and it’s generally ready the day after.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Keep children and pets away from the room on the day
  • Move bottles, mats and clutter away from the area

How to get a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Advice

How we price bath re-enamelling

Resurfacing from £350. There is no charge for travel to Townfield. The price depends on:

  • Previous DIY repairs that have to come out
  • Unusual colours or finishes
  • Whether we combine several jobs
  • How much damage there is

The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.

Send photos for a quote

You can take the pictures on your phone. Just ensure we can see:

  • Something in shot to show the size
  • One picture of the whole bath
  • Any earlier repairs or coatings
  • Your postcode, so we can check dates

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.

Townfield: your questions answered

Do you need to take the bath out?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

How long will the bath be out of use?

Usually one day, with the bath ready the next day. Deeply pitted baths may need a second day.

Can I add another job to the visit?

Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.

How do I get a price for bath re-enamelling in Townfield?

Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

What areas do you cover?

All of County Durham, and the rest of the UK. There’s no extra charge for travel.

Do you come to Townfield?

Yes. We work across the UK and come to Townfield and the rest of County Durham. Send us pictures for a fixed quote, or call 0345 017 0787.

Do the materials smell?

It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.

Keeping it looking good

Aftercare is simple:

  • Keep suction mats out of the bath
  • Use washing-up liquid and a soft cloth
  • Do not let dyes or oils sit on the finish
  • Store bottles off the bath

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.

Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

Covering Townfield

Townfield is about 10 miles west of Consett, in County Durham. Jobs in Townfield are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Townfield is one of 329 places in County Durham where we work. Our jobs stretch from Townfield to Newcastle upon Tyne (21 miles away).

All of DH8 is covered. If you’re just outside Townfield, we cover Ramshaw (1 mile south), Baybridge (1 mile north), Blanchland (2 miles north-east), Rookhope (4 miles south) and Edmundbyers (4 miles east). Within a short drive, we also cover Consett (10 miles east), Crook (15 miles south-east), Annfield Plain (14 miles east), Blackhill (10 miles east), Crookhall (10 miles east) and Benfieldside (9 miles east).

Near you in Townfield

We visit homes around Church of St James.

Map of Townfield © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.