County Durham · England
Bath Re-enamelling for Blanchland homes
Bath re-enamelling in and around Blanchland: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Brown or grey marks that don’t clean off
How it works
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. Most visits take most of the day, tidy-up included.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Open a window if you can
- Let us know about parking or access
- Clear the area around the damage
Ask for a price
Send us a picture of the damage and one of the entire item, with your DH8 postcode, and we will reply with a fixed price.
Read more
Bath re-enamelling in Blanchland, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s worn patches where water runs and sits and lots of chips and rust spots, we can generally put it right.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Blanchland (DH8)
- Region
- County Durham
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Blanchland
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
Take a look at our full price list or resurfacing vs replacement cost guide.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Your questions about bath re-enamelling in Blanchland
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Is a repair better than a new one?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What else we do in Blanchland
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Blanchland and the surrounding area
Blanchland is about 9 miles west of Consett, in County Durham. Anywhere in DH8, we come to you. We cover 329 places in County Durham. We work right across the region, from Blanchland to Newcastle upon Tyne (19 miles away).
Jobs in DH8 are booked in the same way as anywhere else. Whether you live on Burnside Court and Clap Shaw or anywhere nearby, we can come to you. Nearby, we also work in Baybridge (1 mile south-west), Townfield (2 miles south-west), Ramshaw (2 miles south-west), Edmundbyers (3 miles east) and Rookhope (5 miles south). Larger places within reach include Consett (9 miles east), Stanley (15 miles east), Crook (15 miles south-east), Annfield Plain (13 miles east), Blackhill (9 miles east) and Crookhall (9 miles east).
Near you in Blanchland
Our customers here include homes close to Church of St Mary and The Lord Crewe Arms Hotel.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Aftercare tips
Once the work has cured, treat it gently:
- Keep toiletries on a shelf rather than in the bath
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
- Get any chip repaired quickly
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Prices and what affects them
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- Whether it’s a chip, crack, burn or wear
- Access to the area
- How hard the colour is to match
- How many areas need work
Our prices are the same across the UK, so there is no premium for Blanchland. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
When you take your pictures, these tips help us give you a firm price:
- A close-up of the damage, in focus
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- Details of any past repairs
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
