Sheffield · England
Bath re-enamelling & resurfacing in Ughill, Sheffield
Damaged bath in Ughill? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
Do you need bath re-enamelling in Ughill?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
If you can see any of these, send us a photo:
- An old resurfacing that’s failing
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
- An outdated colour you’d like to change
Before booking anyone
- How to care for the finish
- A fixed quote, and whether VAT is included
- Whether there are any call-out or travel charges
- What preparation is included
Bath re-enamelling in Ughill without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s thin, worn enamel in places and enamel that’s lost its shine and feels rough, we can typically put it right, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Ughill (S6)
- County
- Sheffield
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What bath re-enamelling costs
Prices start from £350. There is no area surcharge for Ughill. The price reflects:
- The material and finish
- Any earlier repairs that need removing first
- How much damage there is
- Where the damage is and how we get to it
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can take the pictures on your phone. Make sure they show:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
If you are in Ughill and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Ughill and the surrounding area
Ughill is about 7 miles north-west of Sheffield, in Sheffield. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Ughill is one of 118 towns and villages in Sheffield we cover. We work right across the region, from Ughill to Manchester (25 miles away).
Our technicians cover all of the S6 postcode area and the streets around it. Close by, we cover Low Bradfield (1 mile north), Dungworth (1 mile east), High Bradfield (1 mile north-east), Stacey Bank (2 miles east) and Storrs (2 miles east). We also work in nearby towns such as Sheffield (7 miles south-east), Netherthorpe (6 miles east), Upperthorpe (5 miles east), West End (6 miles east), Walkley (5 miles east) and Broomhall (6 miles south-east).
Local landmarks in Ughill
We visit homes around The Plough pub and the streets around them. Well-known places in the area include King Edward VII Orthopaedic Hospital (3 miles south-east). Green spaces nearby include Stanage Edge and Fox Hagg.
Aftercare tips
To keep it looking its best:
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Repairing versus replacing in Ughill
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- No need to remove anything
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
- One-year guarantee on every repair
Read our pricing and bath cost comparison.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Ughill: your questions answered
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
What information do you need?
Use the quote form or ring 0345 017 0787.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. You can expect it to take the best part of a day, and we’ll keep you posted as we go.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
Get a quote
Upload photos of the damage and one of the whole item, and tell us you are in Ughill, and we will come back with a fixed quote.
Read more
Also in Ughill
About our accreditations · Every repair comes with a one-year guarantee.
