Worcestershire · England
Bath Re-enamelling in Upper Strensham
Bath re-enamelling in Upper Strensham without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- A peeling or bubbling previous coating
Bath re-enamelling in Upper Strensham, done in place
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It usually takes one visit, with the bath ready to use the following day. Typical jobs include stains that won’t shift and an outdated colour you’d like to change, in pressed steel baths, Victorian roll-tops and cast iron baths.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Upper Strensham (WR8)
- Area hub
- Worcestershire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. There is no area surcharge for Upper Strensham. What changes the price is:
- The type of damage
- Previous DIY repairs that have to come out
- What the surface is made of
- The size and number of damaged areas
The price reflects the work involved, not where you live. You’ll see the full price before you book.
How to get a fixed quote
We price nearly every job from pictures. This is what we need:
- Something in shot to show the size
- Any details about the material
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Also near Upper Strensham
Other services in Upper Strensham
When we’d advise against a repair
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
When to call us in Upper Strensham
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Get in touch if you’ve noticed any of these:
- Lots of chips and rust spots
- Thin, worn enamel in places
- A roll-top that’s seen better days
- Brown or grey marks that do not clean off
Comparing quotes
- How long it needs to cure
- What preparation is included
- What aftercare is recommended
- Whether the price is fixed and includes VAT
Landlords, agents and businesses in Upper Strensham
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
Upper Strensham questions
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and we’ll quote them together.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your WR8 postcode.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Do you cover Upper Strensham?
We do. We send a technician to Upper Strensham for every job, and the price is the same as everywhere else.
Upper Strensham and the surrounding area
Upper Strensham is about 5 miles north of Tewkesbury, in Worcestershire. From the centre of Upper Strensham to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover 376 places in Worcestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 31 miles away.
Postcode districts we cover here: WR8. Streets in the area include Hill View Road, Strensham Gate and Court Road, and we cover them all. We also travel to Lower Strensham (1 mile north), Naunton (1 mile west), Baughton Hill (2 miles north), Twyning (2 miles south) and Green Street (2 miles west). Larger places within reach include Worcester (10 miles north), Great Malvern (9 miles north-west), Droitwich Spa (14 miles north), Evesham (9 miles east), Pershore (5 miles north-east) and Malvern (9 miles north-west).
Around Upper Strensham
In Upper Strensham, that means homes near St John the Baptist's Church. The closest station to Upper Strensham is Ashchurch for Tewkesbury station, roughly 4.1 miles south of the centre. Nearby you’ll also find Elmley Castle (4.8 miles east). Not far away are Tiddesley Wood and Bredon Hill.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Avoid suction-cup mats
- Have chips seen to early
- Dry the bath after use to stop limescale
- Do not let dyes or oils sit on the finish
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Repair or replace: which is better?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Upper Strensham customers choose us
- Repair technicians who travel to you, UK-wide
- Same prices wherever you are
- One visit for most repairs
- Colours mixed by hand to suit your surface
Take a look at our prices page or resurfacing vs replacement cost guide.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes most of the day. We clean up when we are done and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
