Staffordshire · England
Bath Re-enamelling in Uttoxeter
Our technicians come to Uttoxeter for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A dull, rough surface that won’t come clean
Bath re-enamelling at your home in Uttoxeter
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with brown or grey marks that don’t clean off and lots of chips and rust spots, we can generally put it right, on cast iron baths, pressed steel baths and Victorian roll-tops alike.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Where
- Uttoxeter (ST14)
- Area hub
- Staffordshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we are called out for in Uttoxeter
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Look out for these signs:
- A period or roll-top bath worth keeping
- Stains that will not shift
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
What to look for in a quote
- What preparation is included
- Who turns up on the day
- Whether the colour is mixed to match
- When it can be used again
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Uttoxeter clients choose us
- Rooms protected and left tidy
- Usually one visit, start to finish
- Technicians who travel to you, UK-wide
- No need to remove anything
Read our pricing or resurfacing vs replacement cost guide.
What affects the price in Uttoxeter
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- The type of damage
- How hard the colour is to match
- Where the damage is and how we get to it
- The material
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Details of any past repairs
- Daylight if possible, and no flash reflection
- Any details about the material
- A clear, close picture of the problem area
Email us photos of the damage and one of the whole item, and tell us you are in Uttoxeter, and we’ll reply with a fixed quote.
Uttoxeter and nearby
Uttoxeter is about 12 miles north-west of Burton upon Trent, in Staffordshire. From the centre of Uttoxeter to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Uttoxeter is one of 512 places in Staffordshire where we work. Our nearest city page is Birmingham, about 30 miles away.
All of ST14 is within our area. Local streets include High Street, Market Place and Market Street. Being close to the A518 and A522, Uttoxeter is simple for us to get to. We also cover the places around Uttoxeter: The Heath (1 mile north), Spath (1 mile north), Stramshall (1 mile north), Doveridge (2 miles east) and Waldley (3 miles north-east). Within a short drive, we also cover Stafford (12 miles south-west), Burton upon Trent (12 miles south-east), Cannock (15 miles south-west), Lichfield (15 miles south), Longton (12 miles north-west) and Rugeley (10 miles south).
Near you in Uttoxeter
Locally, our jobs take us to homes close to Heath Mission Church, Wellington Inn and St Joseph's Catholic Primary School. The closest station to Uttoxeter is Uttoxeter station, roughly 0.7 miles south-east of the centre. A little further out are Redfern's Cottage (under half a mile south-east).
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Towns and villages near Uttoxeter
More services for Uttoxeter
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
What we cannot put right
A few problems are outside what a surface repair can do:
- A bath split right through the body
- Problems we can’t see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
How it works
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Uttoxeter questions
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you work in Uttoxeter?
We do. We send a technician to Uttoxeter for every job, and the price is the same as everywhere else.
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
How much does bath re-enamelling cost in Uttoxeter?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams in Staffordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
