Staffordshire · England
Bath re-enamelling & resurfacing in Longton, Staffordshire
Local bath re-enamelling for Longton: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A coating lifting around the plughole
Bath re-enamelling at your home in Longton
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Typical jobs include a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off, on basins & shower trays, Victorian roll-tops and acrylic baths.
Big or small, you get the same one-year guarantee in Longton and across Staffordshire.
- Where
- Longton (ST3, ST4, ST11)
- County
- Staffordshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Longton
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
How much does bath re-enamelling cost in Longton?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Which areas do you work in?
Everywhere in the UK, Longton included. There is no extra charge for travel.
What happens once I’ve sent photos?
We review the photos and send a fixed quote and the next dates we have.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a full day from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the next day.
Before we arrive
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Related advice
Prices and what affects them
Prices start from £350. You’ll know the full cost before booking. We look at:
- Any earlier repairs that need removing first
- Access to the area
- What kind of damage it is
- Unusual colours or finishes
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Two or three clear photos are typically enough. Try to include:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- What it’s made of, if you know
- A coin beside the damage so we can judge size
Email us photos of the damage and one of the entire item, with your ST3 postcode, and we will reply with a fixed price.
Honest limits
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
- Problems we can’t see until an old finish comes off
If in doubt, send photos and we’ll say what we think.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Where we work around Longton
Longton is about 2 miles south-east of Stoke-on-Trent, in Staffordshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Longton is one of 512 towns and villages in Staffordshire we cover. We work right across the region, from Longton to Manchester (34 miles away).
Jobs in ST3, ST4 and ST11 are booked in the same way as anywhere else. From Malt Lane, Meir Road and Lundy Road or anywhere nearby, a technician can come to you. Being close to the A5007, Longton is easy for our repair technicians to reach. Other places close to Longton include Adderley Green (1 mile north-east), Dresden (1 mile south), Blurton (1 mile west), Florence (1 mile south) and Heron Cross (1 mile west). We also work in nearby towns such as Stafford (13 miles south), Newcastle-under-Lyme (5 miles north-west), Stone (6 miles south), Leek (9 miles north-east), Biddulph (9 miles north) and Alsager (11 miles north-west). As one of the bigger places in Staffordshire, Longton is somewhere we visit frequently.
Local landmarks in Longton
Our customers here include homes close to St Thomas More Catholic Academy, Church of St James and St Gregory's Catholic Academy. Longton has its own railway station: Longton station. Nearby you’ll also find North Staffordshire Royal Infirmary (3 miles north-west) and Gladstone Pottery Museum (under half a mile south-east). Green spaces nearby include Hem Heath Woods.
For landlords and businesses
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Repair or replace in Longton?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
Why us?
- Repair technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
- No need to remove anything
Read our pricing and bath cost comparison.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Towns and villages near Longton
Other services in Longton
Signs you need bath re-enamelling in Longton
Hard water speeds up the wear, and abrasive cleaners do the most damage.
You may need us if you’ve spotted:
- An original cast iron bath that needs restoring
- Brown or grey marks that don’t clean off
- Chips and rust in more than one place
- A bath in a colour that no longer suits
What your quote should include
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- What happens if they find more damage
- How soon you can use it again
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
