Norfolk · England
Bath re-enamelling & resurfacing in Wacton, Norfolk
Full bath re-enamelling and resurfacing at your home in Wacton, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
When to call us in Wacton
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Most people get in touch when they notice something like this:
- Staining under the taps and around the waste
- A roll-top that’s seen better days
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
What to look for in a quote
- What preparation is included
- A fixed price, and whether VAT is included
- Whether the price covers travel
- What protection goes down before work starts
How we handle bath re-enamelling in Wacton
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Our technicians work on pressed steel baths, acrylic baths and Victorian roll-tops, and common reasons people contact us are thin, worn enamel in places and staining under the taps and around the waste.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Wacton (NR15)
- County
- Norfolk
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Wacton
What happens after I send pictures?
You will get a fixed quote back. You are under no obligation.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
How long is the bath unusable?
Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What we cannot put right
A few problems are outside what a surface repair can do:
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
- A bath split right through the body
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Wacton
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Wacton. What changes the price is:
- Previous DIY repairs that have to come out
- How many areas need work
- Unusual colours or finishes
- Access to the area
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
How to get a fixed quote
Two or three clear photos are typically enough. It helps if you send:
- Any earlier repairs or coatings
- Natural light rather than flash
- Where you are, by postcode
- Something in shot to show the size
Upload pictures of the damage and one of the entire item, and tell us you are in Wacton, and we will reply with a fixed price.
Also near Wacton
Other services in Wacton
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Get any chip repaired quickly
- Never use suction bath mats
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About Wacton
Wacton is about 7 miles south-east of Wymondham, in Norfolk. Customers in Wacton get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Our repair technicians cover 797 places across Norfolk.
Jobs in NR15 are booked in the same way as anywhere else. Whether you live on Church Road and Hall Lane or anywhere nearby, a technician can come to you. Other places close to Wacton include Bustard's Green (1 mile north-west), Long Stratton (1 mile north-east), Stratton St Michael (2 miles north-east), Morningthorpe (2 miles east) and Colegate End (3 miles south). Further out, we also cover Norwich (11 miles north), Wymondham (7 miles north-west), Sprowston (13 miles north), Thorpe St Andrew (12 miles north-east), Attleborough (9 miles west) and Norwich Lanes (11 miles north).
Around Wacton
Our clients here include homes close to Church of All Saints, Long Stratton High School and Manor Field Infant and Nursery School and the streets around them. Other landmarks nearby include Norfolk Tank Museum (1.1 miles north-west).
Repair or replace in Wacton?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the entire surface without moving it. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. You’ll see the full price before you book, with no extras added later.
Why Wacton clients choose us
- No need to remove anything
- We’ll tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
- Every repair guaranteed for a year
See our full price list and guide to resurfacing and replacement costs.
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow most of the day. Before leaving, we tell you how long to leave it and how to care for it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
Ask for a price
If you’re in Wacton and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
