Bury · England
Bath Re-enamelling for Walmersley homes
Local bath re-enamelling for Walmersley: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A dull, rough surface that will not come clean
Bath re-enamelling at your home in Walmersley
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. If you are dealing with a coating lifting around the plughole and an original cast iron bath that needs restoring, we can help, on acrylic baths, cast iron baths and Victorian roll-tops alike.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Location
- Walmersley (BL9, BL8)
- Area hub
- Bury
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
So the finish stays in good condition:
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
How it works
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
How to get a price
To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
Nearby places to Walmersley
Also in Walmersley
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
What a repair cannot fix
It helps to know what we cannot do:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Walmersley and nearby
Walmersley is about 1 mile north-east of Woolfold, in Bury. Whether you’re in the middle of Walmersley or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 40 towns and villages across Bury, from the larger towns to small villages. Our jobs stretch from Walmersley to Manchester (10 miles away).
All of BL9 and BL8 is covered, from the main roads to the quietest streets. Local streets include How Lane, Old Lane and Long Lane, all of which we cover. Neighbouring places we cover include Brandlesholme (1 mile south-west), Summerseat (1 mile north-west), Kirklees (1 mile west), Brooksbottoms (1 mile north-west) and Woolfold (1 mile south-west). Larger places within reach include Radcliffe (4 miles south), Prestwich (6 miles south), Whitefield (5 miles south), Besses o' th' Barn (5 miles south), Unsworth (4 miles south) and Redvales (3 miles south).
Near you in Walmersley
We visit homes around Burrs Country Park, Christ Church and Springside Primary School, among other places. The nearest railway station is Bromley Cross station, about 4.5 miles west of the centre. Well-known places in the area include The Fusilier Museum (1.7 miles south) and Bury General Hospital (0.7 miles south-east). Green spaces nearby include Hail Storm Hill.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Repair or replace in Walmersley?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
- One-year guarantee on every repair
- Usually one visit, start to finish
Take a look at our full price list and guide to resurfacing and replacement costs.
Walmersley questions
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Bury.
What happens next?
You get a fixed price and available dates. If we need another angle, we will ask.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Is repairing better than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Walmersley. What changes the price is:
- What the surface is made of
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- How hard the colour is to match
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your photos
Two or three clear photos are usually enough. Try to include:
- One picture of the entire bath
- Any earlier repairs or coatings
- The material, if you know it
- A coin or ruler next to the damage for scale
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
