Devon · England
Bath Re-enamelling for Washfield homes
Problem with your bath in Washfield? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
About Washfield
Washfield is about 2 miles north-west of Tiverton, in Devon. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. Our technicians cover 586 places in Devon, from the larger towns to small villages.
All of EX16 is within our area. Other places close to Washfield include Hayne (1 mile east), Bolham (1 mile east), Tiverton (2 miles south-east), Withleigh (2 miles south-west) and Chevithorne (3 miles east). We also work in nearby towns such as Exeter (14 miles south), St Thomas (15 miles south), Larkbeare (15 miles south), Polsloe (14 miles south), Cullompton (7 miles south-east) and Heavitree (14 miles south).
Landmarks near Washfield
In Washfield, that means homes near Tiverton High School, Bolham Community Primary School and Rose & Crown Inn and the streets around them. Further afield, we also cover the area around Tiverton and District Hospital (1.7 miles south-east) and Tiverton Castle (2 miles south-east).
Bath re-enamelling at your home in Washfield
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. If you are dealing with worn patches where water runs and sits and brown or grey marks that don’t clean off, we can generally put it right.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Location
- Washfield (EX16)
- Region
- Devon
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What else we do in Washfield
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Keep suction mats out of the bath
- Have chips seen to early
- Do not use the bath until it has fully cured
- Repair dripping taps early
Wipe the bath dry after use where you can, and rinse off any bath products.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Repair or replace in Washfield?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Every repair guaranteed for a year
- Same prices wherever you are
- A fixed quote before you book
- Nothing taken out or refitted
See our pricing and resurfacing vs replacement cost guide.
Questions from Washfield
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send photos.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
What happens once I’ve sent photos?
We review the photos and send a fixed quote and the next dates we have.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Signs you need bath re-enamelling in Washfield
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The things clients generally mention when they call are:
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
- A roll-top that is seen better days
What your quote should include
- What prep work is covered
- Aftercare advice
- What the guarantee covers, and for how long
- How changes to the job are handled
What we can’t put right
To be straight with you, some problems need a different fix:
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- What kind of damage it is
- How many areas need work
- Any earlier repairs that need removing first
- Unusual colours or finishes
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed price
Before you send photos, a few simple things make all the difference:
- A wider photo showing the whole bath
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- Natural light rather than flash
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow the best part of a day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
