Somerset · England
Bath Re-enamelling for Weare homes
Full bath re-enamelling and resurfacing at your home in Weare, with a one-year guarantee on every repair.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
Repair or replace: which is better?
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, with the bath ready the day after. Prices start from £350. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in Weare
- Free fixed quotes from pictures
- We leave the room as we found it
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
Read our pricing or guide to resurfacing and replacement costs.
Bath re-enamelling at your home in Weare
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s a peeling or bubbling previous coating and a coloured bath you want in white, we can help, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Weare (BS26)
- Region
- Somerset
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Weare
Weare is about 7 miles east of Burnham-on-Sea, in Somerset. Whether you are in the middle of Weare or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Weare is one of 640 places in Somerset we cover.
Our visits in BS26 are booked in the same way as anywhere else. That includes homes on Henmore Lane, Coombe Lane and Sparrow Hill Way. If you’re just outside Weare, we cover Lower Weare (1 mile north-west), Brinscombe (1 mile south-east), Alston Sutton (1 mile south), Badgworth (1 mile west) and Cross (1 mile north). Within a short drive, we also cover Bridgwater (12 miles south-west), Burnham-on-Sea (7 miles west), Wells (9 miles south-east), Shepton Mallet (14 miles south-east), Street (11 miles south-east) and Glastonbury (10 miles south-east).
Around Weare
Around Weare, we work in homes near The Lamb at Weare pub, Weare Academy First School and Church of St Gregory and the streets around them. Well-known places in the area include Goughs Motor Museum (3.1 miles east) and Banwell Castle (3.7 miles north). Open spaces near Weare include Wavering Down and Kingswood.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
What a repair can’t fix
We’d rather lose a job than do one that won’t last, so these are the limits:
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Landlord and trade work in Weare
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Landlords, letting agents and housing providers in Weare use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Nearby places to Weare
What else we do in Weare
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
What affects the price in Weare
Resurfacing from £350. We price every job individually, from your photos. What matters most is:
- Whether old repairs or coatings need taking off
- The material
- The type of damage
- Where the damage is and how we get to it
Our prices are the same across the UK, so there’s no premium for Weare. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
It only takes a minute to photograph the damage. Please include:
- Details of any past repairs
- A close-up of the damage, in focus
- A wider photo showing the whole bath
- The material, if you know it
For a price in Weare, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
What happens on the day
The work is clean and fairly quiet. Protection goes down first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Point us to the nearest place to park
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
Ask for a price
Send us a picture of the damage and one of the whole item, and tell us you’re in Weare, and we’ll reply with a fixed quote.
Read more
Signs you need bath re-enamelling in Weare
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is usually as strong as ever.
These are the problems we are asked about most:
- Several chips and rust patches
- A peeling or bubbling previous coating
- A coloured bath you want in white
- Brown or grey marks that do not clean off
What to look for in a quote
- How soon you can use it again
- Whether the price is fixed and includes VAT
- Whether cleaning and preparation are in the price
- How changes to the job are handled
Weare: your questions answered
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo with your BS26 postcode.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Just add the extra items to your pictures and we’ll quote them together.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
About our accreditations · Every repair comes with a one-year guarantee.
