Newcastle upon Tyne · England
Bath re-enamelling & resurfacing in West Moor, Newcastle upon Tyne
Bath re-enamelling in and around West Moor: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A roll-top that’s seen better days
About our bath re-enamelling in West Moor
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Typical jobs include an original cast iron bath that needs restoring and a coloured bath you want in white, on cast iron baths, Victorian roll-tops and pressed steel baths.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- West Moor (NE12, NE3, NE7)
- Area hub
- Newcastle upon Tyne
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering West Moor
West Moor is about 1 mile west of Longbenton, in Newcastle upon Tyne. Whether you’re in the middle of West Moor or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. West Moor is one of 63 places in Newcastle upon Tyne where we work.
Here we cover the NE12, NE3 and NE7 postcode area. Jobs here include addresses on Glebe Road, Kings Road and Weldon Road and the roads around them. You will find West Moor on the A189, which makes it straightforward to reach. Neighbouring places we cover include Longbenton (1 mile east), Benton (1 mile south-west), Northumberland Park (1 mile north-east), Killingworth Village (1 mile north-east) and Little Benton (1 mile south-east). Further out, we also cover Newcastle upon Tyne (3 miles south-west), Bensham (5 miles south), Carr Hill (5 miles south), Denton (5 miles south-west), Slatyford (4 miles south-west) and Low Fell (6 miles south).
What’s near West Moor
Typical jobs here are in homes near Benton Dene Primary School, Longbenton Community College and St Mary's Catholic Comprehensive School, among other places. Also close by are Gosforth Park (1.5 miles north-west) and St Bartholomew's Church (0.5 miles south-east). West Moor’s nearest station is Northumberland Park (Tyne and Wear) station, roughly 2.5 miles east. Other landmarks nearby include Longbenton Urban District (less than half a mile east) and Segedunum Roman Fort & Museum (2.9 miles south-east). Open spaces near West Moor include Havannah Nature Reserve and Bent Hill.
Common problems we fix in West Moor
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Contact us if you’ve noticed:
- A dull, rough surface that will not come clean
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
What to look for in a quote
- How the colour is matched
- How the room is protected while they work
- What aftercare is recommended
- How changes to the job are handled
When a repair is not the answer
We will always be straight with you, so here’s what a repair will not do:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in West Moor
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
West Moor: your questions answered
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you come to West Moor?
Yes. We cover the entire UK and travel to West Moor and the rest of Newcastle upon Tyne. Send us photos for a fixed quote, or call 0345 017 0787.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Is a repair better than a new one?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Landlords, agents and businesses in West Moor
We carry out planned and one-off repairs for housing associations and facilities teams in Newcastle upon Tyne and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
What bath re-enamelling costs
Resurfacing from £350. We don’t charge extra for travel to West Moor. The price depends on:
- How much damage there is
- Previous DIY repairs that have to come out
- The material and finish
- The type of damage
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- Any earlier repairs or coatings
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
To get a price, send two or three photos through our quote form or ring us. We’ll say immediately whether it can be repaired.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
Other services in West Moor
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Have chips seen to early
- Keep suction mats out of the bath
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
How the visit works
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. Allow the best part of a day.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
How to get a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
