North Lincolnshire · England
Bath Re-enamelling in Westwoodside
Problem with your bath in Westwoodside? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A coloured bath you want in white
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
What you get with us
- Fixed prices from your pictures
- One-year guarantee on every repair
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list or guide to resurfacing and replacement costs.
How we handle bath re-enamelling in Westwoodside
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. If you are dealing with a coloured bath you want in white and a period or roll-top bath worth keeping, we can help, on Victorian roll-tops, cast iron baths and basins & shower trays alike.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Westwoodside (DN9)
- Region
- North Lincolnshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Westwoodside
What else we do in Westwoodside
Signs you need bath re-enamelling in Westwoodside
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- Stains that will not shift
- Worn patches where water runs and sits
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
Questions to ask before booking
- Whether they match the colour on site
- When it can be used again
- What happens if the damage is worse than the pictures show
- How to care for the finish
Westwoodside and the surrounding area
Westwoodside is about 7 miles north-west of Gainsborough, in North Lincolnshire. Whether you’re in the middle of Westwoodside or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 90 towns and villages in North Lincolnshire, from the larger towns to small villages. Our nearest city page is Leeds, about 36 miles away.
We cover every part of the DN9 postcode area. Whether you live on Grange Court, The Birches and Newbigg or anywhere nearby, we can come to you. Neighbouring places we cover include Haxey (1 mile east), Graizelound (2 miles south-east), East Lound (2 miles east), Misterton (3 miles south) and West Stockwith (4 miles south-east). Within a short drive, we also cover Scunthorpe (10 miles north-east), Bottesford (9 miles north-east), Frodingham (11 miles north-east), Crosby (12 miles north-east), Broughton (14 miles north-east) and Epworth (3 miles north-east).
Near you in Westwoodside
Around Westwoodside, we work in homes near Church of St Nicholas, Duke William pub and Westwoodside Church of England Academy. A little further out are Haywain Farm Museum (3.3 miles north-east).
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- The type of damage
- How hard the colour is to match
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- Any earlier repairs or coatings
- Natural light rather than flash
- Something in shot to show the size
- The material, if you know it
For a price in Westwoodside, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Store bottles off the bath
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
- Don’t let dyes or oils sit on the finish
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
Ask for a price
To get a price, send two or three photos using our quote form or ring us. We will say immediately if a repair is the right fix.
Read more
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Westwoodside: your questions answered
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Do you come to Westwoodside?
We do. We send a technician to Westwoodside for every job, and the price is the same as everywhere else.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
Are there extra charges for Westwoodside?
No. Our quotes include travel, with the same prices everywhere we work.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
What we can’t put right
To be straight with you, there are a few things a repair won’t fix:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
- A bath that’s rusted through
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
