Suffolk · England

Bath Re-enamelling for Wetherden homes

Damaged bath in Wetherden? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Wetherden

Bath re-enamelling at your home in Wetherden

After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for a roll-top that’s seen better days and worn patches where water runs and sits, in basins & shower trays, cast iron baths and acrylic baths.

The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.

Location
Wetherden (IP14)
Area hub
Suffolk
Guarantee
12 months on all our work
Quotes
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: an old basin refinished to bright white

Landlords, agents and businesses in Wetherden

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Our work in Wetherden

Wetherden is about 4 miles north-west of Stowmarket, in Suffolk. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover all 731 towns and villages across Suffolk. You can also see our page for London, about 67 miles away.

Every address in IP14 is covered, from the main roads to the quietest streets. Jobs here include addresses on School Meadow, Kate's Lane and Church Street. We also cover the places around Wetherden: Haughley New Street (1 mile south-east), Elmswell (1 mile north-west), Borley Green (1 mile south-west), Woolpit Heath (1 mile south-west) and Haughley (1 mile east). Larger places within reach include Ipswich (15 miles south-east), Bury St Edmunds (10 miles west), Sudbury (15 miles south-west), Stowmarket (4 miles south-east), Hadleigh (12 miles south) and Diss (13 miles north-east).

Landmarks near Wetherden

Locally, our jobs take us to homes close to Elmswell Community Primary School and Church of St Mary the Virgin. Wetherden’s nearest station is Elmswell station, roughly 1.3 miles north-west. Well-known places in the area include Haughley Castle (1.2 miles east) and Woolpit & District Museum (2.1 miles west). Green spaces nearby include Norton Wood.

Map of Wetherden © OpenStreetMap contributors

When we would advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Damage hidden under a previous coating, until it’s stripped back
  • Leaks from fittings rather than the bath
  • A cast iron or steel bath that is cracked right through

Send us pictures and we will tell you honestly before you book.

Surfaces we repair

  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths

Questions from Wetherden

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

What happens once I’ve sent photos?

You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.

Can you make a coloured bath white?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

How long will the bath be out of use?

Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

Does re-enamelling smell?

There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.

Do you resurface freestanding baths?

Yes. Inside and out.

Aftercare tips

It’s all simple stuff, just a few sensible habits:

  • Don’t let dyes or oils sit on the finish
  • Use washing-up liquid and a soft cloth
  • A quick wipe after use keeps limescale away
  • Fix dripping taps quickly

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

The process

Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.

  1. We mask and protect the room and ventilate it.
  2. We clean and degrease the bath and repair any chips or rust.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. We leave it to cure, and it’s usually ready the following day.

Getting ready for the visit

  • Clear the area around the damage
  • Mention any parking restrictions or tricky access
  • Keep a parking space free if you can

Getting a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a fixed price

Related advice

Repairing versus replacing in Wetherden

Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, with the bath back in use the following day. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • We’ll tell you if it’s not worth repairing
  • CHAS and Constructionline accredited
  • No need to remove anything
  • Colour-matched on site

Read our pricing and guide to resurfacing and replacement costs.

Common problems we fix in Wetherden

Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.

Typical reasons for a call-out include:

  • An old resurfacing that’s failing
  • Thin, worn enamel in places
  • Chips and rust in more than one place
  • A coloured bath you want in white

What to look for in a quote

  • How long it needs to cure
  • Whether the price covers travel
  • Who will actually do the work
  • The length of the guarantee and what it covers

Our hiring checklist

Materials and what they mean for the repair

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.