Norfolk · England
Bath re-enamelling & resurfacing in Wighton, Norfolk
Full bath re-enamelling and resurfacing in Wighton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coating lifting around the plughole
How we handle bath re-enamelling in Wighton
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Common call-outs are for lots of chips and rust spots and a coating lifting around the plughole, in pressed steel baths, cast iron baths and acrylic baths.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Wighton (NR23)
- Area hub
- Norfolk
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Wighton and the surrounding area
Wighton is about 17 miles north of Dereham, in Norfolk. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Wighton is one of 797 towns and villages in Norfolk where we work.
We work across NR23. You’ll find streets such as High Street, Kirkgate Lane and Wells Road, and we cover them all. We also travel to Warham (1 mile north-east), Great Walsingham (2 miles south), Little Walsingham (2 miles south), Westgate (2 miles east) and Wells-next-the-Sea (3 miles north-west). Larger places within reach include Sheringham (14 miles east), Fakenham (6 miles south), Holt (9 miles east), Reepham (14 miles south-east), Swanton Morley (15 miles south) and Briston (9 miles south-east).
Local landmarks in Wighton
In Wighton, that means homes near Church of All Saints and Carpenters Arms, among other places. Further afield, we also cover the area around Alfred Cohen Museum (less than half a mile south-west). Green spaces nearby include Holkham National Nature Reserve and The Bink.
What else we do in Wighton
How it works
We agree an arrival time beforehand. Once we’re there, the work takes most of the day in most cases. We leave the room clean and ready to use once it has cured.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
Getting a price
If you’re in Wighton and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Landlord and trade work in Wighton
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Housing associations and facilities teams use us for planned and reactive repairs in Norfolk and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Do you need bath re-enamelling in Wighton?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Clients usually contact us about:
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- Lots of chips and rust spots
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- What aftercare is recommended
- What happens if the damage is worse than the pictures show
- How soon you can use it again
Wighton: your questions answered
How long will the bath be out of use?
One day for most baths, ready the day after. We will confirm timings when we quote.
Which areas do you work in?
Everywhere in the UK, Wighton included. There’s no extra charge for travel.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Do you come to Wighton?
Yes. We work across the UK and come to Wighton. Send photos and we will quote, or call 0345 017 0787.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up and a picture of the entire item with your NR23 postcode.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
How do I book?
Send photos through the quote form or call 0345 017 0787.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Prices start from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Wighton customers choose us
- One-year guarantee on every repair
- Rooms protected and left tidy
- A fixed quote before you book
- Work done at your home or business
Take a look at our pricing or resurfacing vs replacement cost guide.
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- A cast iron or steel bath that’s cracked right through
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Wighton
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Don’t leave bottles, razors or sponges standing on the surface
- Do not use the bath until it has fully cured
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Prices and what affects them
Resurfacing from £350. There’s no charge for travel to Wighton. The price comes down to:
- Doing more than one item at once
- The material
- Access to the area
- How much damage there is
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what helps:
- A wider photo showing the whole bath
- Something in shot to show the size
- Whether it’s been repaired or coated before
- What it’s made of, if you know
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
About our accreditations · Every repair comes with a one-year guarantee.
