Norfolk · England
Bath re-enamelling & resurfacing in Great Walsingham, Norfolk
Damaged bath in Great Walsingham? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
About Great Walsingham
Great Walsingham is about 16 miles north of Dereham, in Norfolk. Anywhere in NR22, we come to you. Our technicians cover 797 places across Norfolk, from the larger towns to small villages.
We work across the NR22 postcode area. Whether you live on Scarborough Road, Westgate and Windmill Farm or anywhere nearby, a technician can come to you. Nearby, we also work in Little Walsingham (1 mile south-west), Great Snoring (2 miles south), Houghton St Giles (2 miles south-west), North Barsham (2 miles south-west) and East Barsham (3 miles south-west). Larger places within reach include Sheringham (14 miles east), Fakenham (5 miles south), Holt (9 miles east), Wells-next-the-Sea (4 miles north), Reepham (13 miles south-east) and Swanton Morley (13 miles south).
Landmarks near Great Walsingham
Our clients here include homes close to Walsingham CE VA Primary School, Church of All Saints and St Peter and Robin Hood Public House. A little further out are Shirehall Museum (0.6 miles south-west). Green spaces nearby include The Bink and Thursford Wood.
Bath re-enamelling in Great Walsingham without replacing anything
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our repair technicians work on pressed steel baths, basins & shower trays and cast iron baths, and common reasons people contact us are worn patches where water runs and sits and a coloured bath you want in white.
All of our repairs are guaranteed for twelve months in Great Walsingham and everywhere else. If something goes wrong with the work, we come back.
- Area
- Great Walsingham (NR22)
- County
- Norfolk
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
Most damage we see is avoidable. A few tips:
- Keep toiletries on a shelf rather than in the bath
- Get any chip repaired quickly
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Places near Great Walsingham
What else we do in Great Walsingham
Landlords, agents and businesses in Great Walsingham
Landlords, letting agents and housing providers in Great Walsingham use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Repair or replace in Great Walsingham?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day, with the bath back in use the day after. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Great Walsingham customers choose us
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
- One visit for most repairs
- Technicians who travel to you, UK-wide
Read our prices page and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What we can’t put right
In fairness, there are a few things a repair will not fix:
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Prices and what affects them
Resurfacing from £350. There is no charge for travel to Great Walsingham. The price comes down to:
- Whether we combine several jobs
- Access to the area
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Send photos for a quote
Two or three clear pictures are usually enough. Try to include:
- A clear, close picture of the problem area
- What it’s made of, if you know
- Natural light rather than flash
- Details of any past repairs
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
FAQs for Great Walsingham
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
The process
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take a full day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the day after.
Before we arrive
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Read more
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
