Warrington · England
Bath Re-enamelling for Wigshaw homes
We travel to Wigshaw for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An old resurfacing that’s failing
- A bath in a colour that no longer suits
How we handle bath re-enamelling in Wigshaw
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Common call-outs are for a bath that stays dull however much you clean it and brown or grey marks that don’t clean off, across pressed steel baths, cast iron baths and basins & shower trays.
A one-year guarantee comes as standard.
- Location
- Wigshaw (WA3)
- Area hub
- Warrington
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
Some jobs are not right for a repair, for example:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Towns and villages near Wigshaw
More services for Wigshaw
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- The colour and finish to match
- What kind of damage it is
- Where the damage is and how we get to it
- How many areas need work
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- The postcode, so we can plan the visit
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
For a price in Wigshaw, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Looking after it afterwards
So the finish stays in good condition for years:
- Clean with a soft cloth and mild detergent
- Don’t use the bath until it has fully cured
- Fix dripping taps quickly
- Avoid suction-cup mats
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
When to call us in Wigshaw
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
The things customers generally mention when they call include:
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
- Thin, worn enamel in places
What to look for in a quote
- Whether they match the colour on site
- A fixed price, and whether VAT is included
- Whether the price covers travel
- What aftercare is recommended
What happens on the day
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes most of the day. The room is left tidy and ready to use once it has cured.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Before we arrive
- Tell us about parking, stairs or access
- Ensure the room can be ventilated
- Have somewhere for us to park nearby if possible
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Wigshaw: your questions answered
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Wigshaw.
How long is the bath unusable?
Typically one day, with the bath ready the following day. A badly pitted bath can need a second day.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Covering Wigshaw
Wigshaw is about 3 miles south-east of Golborne, in Warrington. Anywhere in WA3, a technician comes to you. We cover all 72 towns and villages across Warrington, from the larger towns to small villages. We work right across the region, from Wigshaw to Manchester (about 13 miles away).
Here we cover the WA3 postcode area. Local streets include Robins Lane and Wigshaw Lane. If you’re just outside Wigshaw, we cover Culcheth (1 mile north-east), Little Town (1 mile south-west), New Lane End (1 mile west), Diggle Green (1 mile north) and Croft (1 mile south-west). We also work in nearby towns such as Warrington (4 miles south-west), Golborne (3 miles north-west), Lymm (5 miles south-east), Fearnhead (3 miles south-west), Wilderspool (5 miles south-west) and Orford (4 miles south-west).
Near you in Wigshaw
Our clients here include homes close to Church of St Lewis, Culcheth Linear Park and Thai Paragon pub and the streets around them. Also close by are Newchurch Community Primary School (within half a mile east) and Culcheth High School (1.1 miles north-east). For rail, the closest station is Birchwood station, roughly 2.5 miles south of the centre. A little further out are Winwick Hospital (3.3 miles south-west) and Wigan and Leigh Exhibition (3.4 miles north). For a walk, there is Highfield Moss and Pennington Flash.
- Local facilities include Lowton East (2.1 miles north-west)
Repair or replace in Wigshaw?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- A year’s guarantee on all work
- Same prices wherever you are
- Dust sheets down, tidy finish
- Colour mixed on the day to match
See our pricing and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
