Somerset · England
Bath re-enamelling & resurfacing in Wilkinthroop, Somerset
Bath re-enamelling across Wilkinthroop and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
Bath re-enamelling in Wilkinthroop, done in place
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Nothing is disconnected or removed. We are frequently asked to fix a roll-top that’s seen better days and stains that won’t shift, across pressed steel baths, acrylic baths and Victorian roll-tops.
Every repair comes with a one-year guarantee.
- Where
- Wilkinthroop (BA8)
- Area hub
- Somerset
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in Wilkinthroop
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How much does bath re-enamelling cost in Wilkinthroop?
Prices start from £350. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Are there extra charges for Wilkinthroop?
Travel is included in the price, with the same prices everywhere we work.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so mention it when you send photos.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Honest limits
It helps to know what we cannot do:
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer before you book.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Repair or replace in Wilkinthroop?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- CHAS and Constructionline accredited
- Rooms protected and left tidy
- A fixed quote before you book
- Generally one visit, start to finish
See our full price list and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
How to care for the repair
So the finish stays in good condition for years:
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Have chips seen to early
- Keep suction mats out of the bath
Dry the bath after use if possible, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What we do, step by step
Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes a full day for most jobs. The room is left tidy and you will know when it can be used.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Read more
About Wilkinthroop
Wilkinthroop is about 9 miles north-east of Yeovil, in Somerset. Customers in Wilkinthroop get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Wilkinthroop is one of 640 towns and villages in Somerset we cover.
Jobs in BA8 are booked in the same way as anywhere else. Nearby, we also work in Stowell (1 mile south), Charlton Horethorne (1 mile west), Horsington (1 mile north-east), South Cheriton (1 mile north-east) and Abbas Combe (1 mile east). We also work in nearby towns such as Yeovil (9 miles south-west), Shepton Mallet (13 miles north), Street (15 miles north-west), Glastonbury (15 miles north-west), Wincanton (4 miles north-east) and Somerton (13 miles west).
Local landmarks in Wilkinthroop
Around Wilkinthroop, we work in homes near Church of St Mary Magdalene. For rail, the closest station is Templecombe station, roughly 1.5 miles east of the centre. A little further out are Sherborne Old Castle (4.4 miles south-west).
Towns and villages near Wilkinthroop
Other services in Wilkinthroop
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We work for landlords, letting agents and housing providers in Wilkinthroop as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
What affects the price in Wilkinthroop
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- The size and number of damaged areas
- The material
Our prices are the same across the UK, with no extra for Wilkinthroop. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- One sharp close-up of the damage
- Details of any past repairs
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
