Sheffield · England
Bath Re-enamelling in Wincobank
Our technicians come to Wincobank for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath in a colour that no longer suits
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Fix dripping taps quickly
- Use washing-up liquid and a soft cloth
- Do not let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Bath re-enamelling at your home in Wincobank
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We work on cast iron baths, pressed steel baths and Victorian roll-tops, and common reasons people get in touch are an old resurfacing that’s failing and brown or grey marks that don’t clean off.
Big or small, it’s backed by a one-year guarantee in Wincobank and across Sheffield.
- Area
- Wincobank (S5, S9, S4)
- County
- Sheffield
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Landlord and trade work in Wincobank
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Questions from Wincobank
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
What happens next?
We review the photos and send a fixed quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
How do I get a price for bath re-enamelling in Wincobank?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- How many items we do on one visit
- How many areas need work
- Access to the area
- What the surface is made of
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- Something in shot to show the size
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- What it’s made of, if you know
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
How it works
Arrival times are agreed in advance. On site, it takes a full day in most cases. The room is left tidy and you’ll know when it can be used.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Keep a parking space free if you can
- Let us know which floor the room is on
- Let the surface dry out before the visit
Get a quote
If you’re in Wincobank and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Nearby places to Wincobank
Also in Wincobank
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Generally one visit, start to finish
- We leave the room as we found it
- A fixed quote before booking
- One-year guarantee on every repair
See our full price list or resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Wincobank
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.
Typical reasons for a call-out include:
- Thin, worn enamel in places
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Enamel that’s lost its shine and feels rough
Comparing quotes
- Is the price fixed, and does it include VAT?
- How your room will be protected
- How the colour is matched
- Aftercare advice
About Wincobank
Wincobank is about 3 miles north-east of Sheffield, in Sheffield. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We cover all 118 towns and villages in Sheffield. You can also see our page for Leeds, about 28 miles away.
Here we cover the S5, S9 and S4 postcode area. Local streets include Lilac Road, Oxted Road and Beacon Road, all of which we cover. We also cover the places around Wincobank: Firth Park (1 mile west), Grimesthorpe (1 mile south), Page Hall (1 mile south-west), Brightside (1 mile south) and Tinsley (1 mile east). Further out, we also cover Sheffield (3 miles south-west), Netherthorpe (3 miles south-west), Upperthorpe (3 miles south-west), West End (3 miles south-west), Walkley (3 miles south-west) and Broomhall (4 miles south-west).
Near you in Wincobank
Locally, our jobs take us to homes close to Firth Park Academy, The Steel Foundry pub and Concord Park and the streets around them. You’ll also find Church of St Margaret (0.5 miles south-east), Hinde House 3-16 School (within half a mile north) and UTC Sheffield Olympic Legacy Park (1.4 miles south). The nearest railway station is Meadowhall station, about 0.8 miles east. Further afield, we also cover the area around Northern General Hospital (1.1 miles south-west) and Kelham Island Museum (2.5 miles south-west). Not far away are Greno Woods.
About our accreditations · Every repair comes with a one-year guarantee.
