Cumbria · England
Bath re-enamelling & resurfacing in Winder, Cumbria
Our repair technicians come to Winder for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coloured bath you want in white
Signs you need bath re-enamelling in Winder
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The most common problems we’re called about are:
- A peeling or bubbling previous coating
- Several chips and rust patches
- An outdated colour you’d like to change
- Enamel that is lost its shine and feels rough
Comparing quotes
- Is the price fixed, and does it include VAT?
- How to care for the finish
- Whether cleaning and preparation are in the price
- What protection goes down before work starts
Bath re-enamelling in Winder, done in place
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. We are often asked to fix enamel that’s lost its shine and feels rough and thin, worn enamel in places, across cast iron baths, basins & shower trays and Victorian roll-tops.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Winder (CA26)
- County
- Cumbria
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Keep suction mats out of the bath
- Fix dripping taps quickly
- Wash away dyes and oils after use
- Get any chip repaired quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes most of the day, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the day after.
How to prepare
- Clear the area around the damage
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Advice
What a repair can’t fix
A repair is not always the answer, and we will tell you before we start. We can’t fix:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we will tell you honestly.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Access to the area
- Any earlier repairs that need removing first
- What the surface is made of
- Whether we combine several jobs
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed quote
Two or three clear photos are typically enough. Try to include:
- Daylight if possible, and no flash reflection
- Details of any past repairs
- A clear, close picture of the problem area
- Any details about the material
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Repair or replace: which is better?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- No extra charge for your area
- Honest advice, even when it means no job
- Most jobs done in one visit
- Fixed prices from your pictures
See our prices page and guide to resurfacing and replacement costs.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
FAQs for Winder
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Do you cover the entire of Cumbria?
All of Cumbria, and the rest of the UK. There’s no extra charge for travel.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
How long will the bath be out of use?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Nearby places to Winder
Also in Winder
Our work in Winder
Winder is about 4 miles east of Whitehaven, in Cumbria. We visit homes and businesses in Winder and nearby villages, so nothing has to leave your home. We work in all 438 towns and villages in Cumbria. We work right across the region, from Winder to Newcastle upon Tyne (about 79 miles away).
Jobs in CA26 work the same way as everywhere else we cover. Neighbouring places we cover include Arlecdon (1 mile north), Rowrah (1 mile east), Frizington (1 mile south-west), Kirkland (2 miles east) and Asby (2 miles north-east). Larger places within reach include Workington (7 miles north-west), Whitehaven (4 miles west), Maryport (11 miles north), Cockermouth (9 miles north-east), Keswick (14 miles east) and Moorclose (6 miles north-west).
Around Winder
We visit homes around Church of St Michael and Arlecdon Primary School. Winder’s nearest station is Corkickle station, about 4.3 miles west. Well-known places in the area include Hayes Castle (3.9 miles north-west) and West Cumberland Hospital (3.8 miles west). Green spaces nearby include Clints Quarry and Knock Murton.
Work for landlords and builders
For anyone letting property in or around Winder, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
