Derbyshire · England

Bath re-enamelling & resurfacing in Wingerworth, Derbyshire

Damaged bath in Wingerworth? We repair it in place, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Wingerworth?

Bath re-enamelling at your home in Wingerworth

We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Typical jobs include an outdated colour you’d like to change and an original cast iron bath that needs restoring, in basins & shower trays, Victorian roll-tops and cast iron baths.

Every job is backed for twelve months. We return to put right any problem with the work.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Wingerworth (S42)
Region
Derbyshire
Warranty
A year, on every repair
Quotes
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026

Should you replace it?

Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • Colours mixed by hand to suit your surface
  • Accredited with CHAS, Constructionline and SafeContractor
  • A fixed quote before you book
  • Straight answers about what a repair can do

See our pricing and guide to resurfacing and replacement costs.

Questions from Wingerworth

Do you resurface freestanding baths?

Yes, frequently. We resurface the inside, and the outside can be refinished too.

What information do you need?

Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.

Which areas do you work in?

The whole UK, including all of Derbyshire. Just include your postcode and we’ll confirm dates.

How much does bath re-enamelling cost in Wingerworth?

Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your S42 postcode.

Can you repair several things at once?

Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.

Can you fix a peeling bath coating?

Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

How long does re-enamelling last?

Care for it and it lasts. Gentle cleaning, no suction mats.

How we price bath re-enamelling

Prices start from £350. We price every job individually, from your pictures. The main factors are:

  • How easy the damage is to reach
  • The material
  • The type of damage
  • How many areas need work

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.

Getting a price from pictures

Most quotes are done from pictures alone. To help us price it:

  • Good light, ideally daylight, without flash glare
  • Any details about the material
  • Whether it’s been repaired or coated before
  • Where you are, by postcode

Most clients in Wingerworth get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Do you need bath re-enamelling in Wingerworth?

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.

You may need us if you’ve spotted any of these:

  • A bath in a colour that no longer suits
  • A dull, rough surface that will not come clean
  • Wear marks under the taps
  • Lots of chips and rust spots

What to look for in a quote

  • What preparation is included
  • How your room will be protected
  • What aftercare is recommended
  • How long it needs to cure

Our hiring checklist

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Mention if the room is upstairs or in a flat
  • Let us know about parking or access

Getting a price

You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Send pictures for a quote

Advice

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Problems we cannot see until an old finish comes off
  • A poorly supported acrylic bath, until it’s firmed up
  • Leaking taps or wastes (a plumber’s job)

Not sure? Send photos and we will give you a straight answer before you book.

Surfaces we repair

  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths

Wingerworth and nearby

Wingerworth is about 3 miles south of Chesterfield, in Derbyshire. We travel to clients in Wingerworth, so you don’t need to take anything anywhere. Wingerworth is one of 532 places in Derbyshire where we work. We work right across the region, from Wingerworth to Manchester (about 38 miles away).

Jobs in S42 are booked in the same way as anywhere else. That includes homes on Longedge Grove, Longedge Rise and Hallfield Close. Close by, we cover Birdholme (1 mile north), Hasland (1 mile north-east), Boythorpe (2 miles north), Spital (2 miles north) and Walton (2 miles north-west). We also work in nearby towns such as Chesterfield (3 miles north), Belper (12 miles south), Heanor (13 miles south), Dronfield (7 miles north), Ripley (11 miles south) and Bolsover (6 miles east).

What’s near Wingerworth

Around Wingerworth, we work in homes near Hunloke Park Primary School, Church of All Saints and Hasland Hall Community School and the streets around them. For rail, the closest station is Chesterfield station, about 2.5 miles north. Further afield, we also cover the area around Walton Hospital (1.5 miles north-west) and Municipal Borough of Chesterfield (2.1 miles north).

Map of Wingerworth © OpenStreetMap contributors

For landlords and businesses

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Keeping it looking good

Simple care helps the repair last. Our advice:

  • Wipe the bath dry after use in hard water areas
  • Wash away dyes and oils after use
  • Don’t use the bath until it has fully cured
  • Keep suction mats out of the bath

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.

If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.