Salford · England
Bath re-enamelling & resurfacing in Winton, Salford
Problem with your bath in Winton? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A coloured bath you want in white
About our bath re-enamelling in Winton
If your bath is sound but looks tired, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. Our repair technicians work on acrylic baths, cast iron baths and Victorian roll-tops, and the jobs we see most are a dull, rough surface that won’t come clean and a roll-top that’s seen better days.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Where
- Winton (M30)
- Region
- Salford
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
About Winton
Winton is about 1 mile west of Eccles, in Salford. Jobs in Winton are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Winton is one of 21 towns and villages in Salford where we work. Our nearest city page is Manchester, about 6 miles away.
Every address in M30 is within our area, from the main roads to the quietest streets. That includes homes on New Lane, Gee Lane and Breck Road and the roads around them. Neighbouring places we cover include Eccles (1 mile east), Monton (1 mile north-east), Patricroft (1 mile south-east), Barton upon Irwell (1 mile south) and Peel Green (1 mile south-west). Larger places within reach include Salford (4 miles east), Little Hulton (4 miles north-west), Irlam (4 miles south-west), Cadishead (5 miles south-west), Pendlebury (3 miles north-east) and Clifton (3 miles north-east).
Around Winton
Typical jobs here are in homes near The Wellington pub, St Patrick's RC High School and Arts College and Church of St Mary Magdalene, among other places. You’ll also find St Gilbert's RC Primary School (under half a mile south-west) and Bridgewater School (1.1 miles north). There’s a railway station in Winton itself: Patricroft station. A little further out are Monks Hall (1.1 miles east) and Trafford Centre (1.4 miles south-east). Not far away are Unicorn Grocery and Cadishead and Little Woolden Moss.
What affects the price in Winton
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- How many areas need work
- Access to the area
- Unusual colours or finishes
- What the surface is made of
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
You can take the pictures on your phone, there’s no need for anything special. Ensure they show:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- Whether it’s been repaired or coated before
Email us a photo of the damage and one of the entire item, and tell us you are in Winton, and we will reply with a fixed quote.
For landlords and businesses
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
We carry out planned and one-off repairs for housing associations and facilities teams in Salford and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How the visit works
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the next day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
Also near Winton
Also in Winton
Common problems we fix in Winton
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Common reasons people in Winton contact us include:
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
Before booking anyone
- How to look after the finish
- How the colour is matched
- Whether there are any call-out or travel charges
- A fixed price, and whether VAT is included
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Leaks from fittings rather than the bath
- A bath that is rusted through
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Winton questions
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can you repair something that’s been repaired before?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Aftercare tips
After the repair has cured, a few habits help it last:
- Don’t leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
- Never use suction bath mats
- Repair dripping taps early
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
