Somerset · England
Bath re-enamelling & resurfacing in Witcombe, Somerset
We travel to Witcombe for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- An old resurfacing that’s failing
- Thin, worn enamel in places
For landlords and businesses
We are used to working with agents and managing companies. Send the address, photos and access details.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Bath re-enamelling at your home in Witcombe
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair Victorian roll-tops, cast iron baths and pressed steel baths, and the jobs we see most are a coating lifting around the plughole and worn patches where water runs and sits.
Every repair comes with our one-year guarantee.
- Where
- Witcombe (TA12)
- County
- Somerset
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Never use suction bath mats
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Signs you need bath re-enamelling in Witcombe
Often the bath has just had decades of use. The body of the bath is generally perfectly sound.
Typical reasons for a call-out include:
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
- Enamel that’s lost its shine and feels rough
- A coloured bath you want in white
Before you book anyone
- Is the price fixed, and does it include VAT?
- How to care for the finish
- If travel is included in the price
- What happens if they find more damage
What else we do in Witcombe
Honest limits
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Prices and what affects them
Prices start from £350. We price every job individually, from your pictures. The main factors are:
- Access to the area
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- How much damage there is
We charge the same wherever you are, with no extra for Witcombe. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- Whether it’s been repaired or coated before
- The material, if you know it
- Natural light rather than flash
- A coin beside the damage so we can judge size
Email us a picture of the damage and one of the whole item, with your TA12 postcode, and we will come back with a fixed quote.
Your questions about bath re-enamelling in Witcombe
Is there any odour?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Which areas do you work in?
Everywhere in the UK, Witcombe included. There’s no extra charge for travel.
How do I get a price for bath re-enamelling in Witcombe?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Can you redo someone else’s repair?
Usually, yes. The old repair comes out first.
Witcombe and nearby
Witcombe is about 5 miles north-west of Yeovil, in Somerset. We visit customers in Witcombe, so there is no workshop to go to. We cover all 640 towns and villages in Somerset.
Here we cover the TA12 postcode area. We also travel to Milton (1 mile west), Ash (1 mile south), Stapleton (1 mile south-west), Martock (2 miles south-west) and Coat (2 miles south-west). Within a short drive, we also cover Taunton (15 miles west), Bridgwater (14 miles north-west), Yeovil (5 miles south-east), Chard (12 miles south-west), Street (9 miles north) and Glastonbury (11 miles north).
What’s near Witcombe
Typical jobs here are in homes near Church of the Holy Trinity, Ash Church of England Primary School and The Bell Inn, among other places. Further afield, we also cover the area around Yeovil Hospital (5.9 miles south-east) and Montacute TV Radio Toy Museum (3.3 miles south-east). The countryside around Witcombe includes Ham Hill.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Repairing versus replacing in Witcombe
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the whole surface with the bath left where it is. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- Repair technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Every repair guaranteed for a year
See our full price list or bath cost comparison.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes the best part of a day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
Ask for a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
