Wakefield · England
Bath re-enamelling & resurfacing in Woolley, Wakefield
Damaged bath in Woolley? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it

How we handle bath re-enamelling in Woolley
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Our technicians work on cast iron baths, acrylic baths and pressed steel baths, and the jobs we see most are staining under the taps and around the waste and chips and rust in more than one place.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

- Location
- Woolley (WF4)
- County
- Wakefield
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes most of the day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Make sure the area is dry
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Read more
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- A bath split right through the body
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Woolley
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Woolley and the surrounding area
Woolley is about 4 miles north of Barnsley, in Wakefield. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. We work in 101 places in Wakefield, from the larger towns to small villages. We work right across the region, from Woolley to Leeds (about 14 miles away).
Jobs in WF4 work the same way as everywhere else we cover. Jobs here include addresses on High Street, The Court Yard and New Road. Nearby, we also work in Hall Green (1 mile north), Haigh (1 mile south-west), Chapelthorpe (2 miles north), Newmillerdam (2 miles north) and Crigglestone (2 miles north). Further out, we also cover Wakefield (5 miles north), Castleford (10 miles north-east), Pontefract (10 miles north-east), Ossett (5 miles north-west), Normanton (7 miles north-east) and South Kirkby and Moorthorpe (9 miles east).
Local landmarks in Woolley
Our customers here include homes close to Kettlethorpe High School, Church of St Peter and Crigglestone Dane Royd Junior and Infant School, among other places. Woolley’s nearest station is Darton station, roughly 1.9 miles south. Well-known places in the area include Barnsley Hospital (3.9 miles south) and Sandal Castle (3.3 miles north). Open spaces near Woolley include Calder Park Wetlands Nature Reserve.
Aftercare tips
So the finish stays in good condition:
- Leave the bath for the full curing time before using it
- Clean with a soft cloth and mild detergent
- Don’t leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Common problems we fix in Woolley
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
These are the problems we’re asked about most:
- A dull, rough surface that won’t come clean
- A coating lifting around the plughole
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
What your quote should include
- What happens if they find more damage
- Who turns up on the day
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
Landlord and trade work in Woolley
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Other services in Woolley
Prices and what affects them
Prices start from £350. We price every job individually. The main factors are:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- How easy the damage is to reach
- What kind of damage it is
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
When you take your photos, a few simple things make all the difference:
- A wider photo showing the entire bath
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
If you are in Woolley and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Your questions about bath re-enamelling in Woolley
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
What happens once I’ve sent photos?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Can you repair something that is been repaired before?
Normally, yes. We remove the old repair before doing a new one, so let us know about it.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
About our accreditations · Every repair comes with a one-year guarantee.

