North Lincolnshire · England
Bath re-enamelling & resurfacing in Wressle, North Lincolnshire
Bath re-enamelling across Wressle and nearby, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- Several chips and rust patches
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Bath re-enamelling at your home in Wressle
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on Victorian roll-tops, cast iron baths and pressed steel baths, and the jobs we see most are a bath in a colour that no longer suits and an original cast iron bath that needs restoring.
Every repair comes with our one-year guarantee.
- Location
- Wressle (DN20)
- Area hub
- North Lincolnshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Aftercare tips
Once the work has cured, treat it gently:
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What happens on the day
We agree an arrival time beforehand, so you are not left guessing. On site, it takes most of the day for most jobs. We leave the room clean.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
Where we work around Wressle
Wressle is about 5 miles east of Scunthorpe, in North Lincolnshire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Wressle is one of 90 towns and villages in North Lincolnshire we cover. Our jobs stretch from Wressle to Leeds (45 miles away).
Every address in DN20 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Brigg Road, Common Road and Bridge Road. Wressle is on the B1208, so it’s easy for us to reach. Other places close to Wressle include Broughton (1 mile west), Scawby Brook (2 miles south-east), Brigg (2 miles south-east), Scawby (2 miles south) and Wrawby (3 miles east). Further out, we also cover Scunthorpe (5 miles west), Barton-upon-Humber (9 miles north-east), Bottesford (6 miles west), Frodingham (5 miles west), Crosby (5 miles west) and Epworth (12 miles west).
What’s near Wressle
Typical jobs here are in homes near Broughton Primary School, The Vale Academy and Church of St Mary and the streets around them. For rail, the closest station is Brigg station, about 2.5 miles south-east. A little further out are Glanford (2.4 miles north-east) and Broughton Castlethorpe (1.4 miles south-east).
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Wressle. What changes the price is:
- Previous DIY repairs that have to come out
- What the surface is made of
- How many areas need work
- How easy the damage is to reach
The price reflects the work involved, not your postcode. You will see the full price before you book.
Send photos for a quote
We price nearly every job from photos. This is what we need:
- Something in shot to show the size
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- Details of any past repairs
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Honest limits
A few problems are outside what a surface repair can do:
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Common questions in Wressle
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
What areas do you cover?
Everywhere in the UK, Wressle included. Travel is included in the price.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Can I add another job to the visit?
Of course, and it generally saves money. Send pictures of everything together and we will quote them together.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Are there extra charges for Wressle?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Also near Wressle
Other services in Wressle
Signs you need bath re-enamelling in Wressle
Hard water speeds up the wear, and abrasive cleaners do the most damage.
You may need us if you’ve spotted:
- Stains that won’t shift
- A coloured bath you want in white
- A dull, rough surface that won’t come clean
- An old resurfacing that is failing
Before booking anyone
- Whether there are any call-out or travel charges
- How the colour is matched
- Whether the price is fixed and includes VAT
- What aftercare is recommended
Landlord and trade work in Wressle
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
