Shropshire · England
Bath Re-enamelling in Wyson
Full bath re-enamelling and resurfacing for homes and businesses in Wyson and across Shropshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A roll-top that’s seen better days
- Staining under the taps and around the waste
How we handle bath re-enamelling in Wyson
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s an original cast iron bath that needs restoring and lots of chips and rust spots, we can generally put it right, on cast iron baths, acrylic baths and pressed steel baths alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Wyson (SY8)
- County
- Shropshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
Most damage we see is avoidable. These habits help:
- Rinse off hair dye, oils and bath bombs immediately
- Keep suction mats out of the bath
- Repair dripping taps early
- Get any chip repaired quickly
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Let us know about parking or access
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
How to get a price
Upload pictures of the damage and a wider shot of the entire item, and tell us you are in Wyson, and we’ll reply with a fixed price.
Advice
Honest limits
We’ll always be straight with you, so here’s what a repair won’t do:
- Steel that has corroded right through
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
Send us pictures and we will tell you honestly.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Do you need bath re-enamelling in Wyson?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
People usually call us when they notice something like this:
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- An old resurfacing that is failing
Before booking anyone
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
- How soon you can use it again
- Whether they match the colour on site
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
How we price bath re-enamelling
Prices start from £350. We price every job individually, from your pictures. The main factors are:
- Doing more than one item at once
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- The material
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- Natural light rather than flash
- A picture taken from further back
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Questions from Wyson
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Will there be a smell?
There can be some smell while we work. It fades as everything cures.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Are there extra charges for Wyson?
Travel is included in the price, with the same prices everywhere we work.
How do I get a price for bath re-enamelling in Wyson?
Resurfacing from £350. We give a fixed price based on pictures of the damage. Send a close-up and a photo of the whole item and your postcode.
Towns and villages near Wyson
More services for Wyson
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why us?
- One-year guarantee on every repair
- Colours mixed by hand to suit your surface
- We leave the room as we found it
- Free fixed quotes from pictures
Read our full price list or bath cost comparison.
Our work in Wyson
Wyson is about 17 miles north of Hereford, in Shropshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Wyson is one of 433 towns and villages in Shropshire where we work. You can also see our page for Birmingham, about 36 miles away.
All of SY8 is covered, from the main roads to the quietest streets. Streets in the area include Wyson Avenue, Wyson Lane and The Coppice. Close by, we cover Woofferton (1 mile north-west), Comberton (2 miles west), Orleton (2 miles west), Mitnell (2 miles north-west) and Ashford Bowdler (2 miles north). We also work in nearby towns such as Ludlow (4 miles north), Craven Arms (11 miles north-west), Cleobury Mortimer (11 miles north-east), East Hamlet (4 miles north) and Halford (11 miles north-west).
Near you in Wyson
In Wyson, that means homes near Church of St Michael and Salwey Arms Public House Including Po Box. For rail, the closest station is Ludlow station, about 4.4 miles north. Further afield, we also cover the area around Ludlow Community Hospital (4.5 miles north) and Little Hereford Manor (2 miles east). For a walk, there’s Dionscourt Hill.
About our accreditations · Every repair comes with a one-year guarantee.
