Derbyshire · England
Bath Re-enamelling for Yeldersley homes
Problem with your bath in Yeldersley? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Stains that won’t shift
Bath re-enamelling at your home in Yeldersley
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It usually takes one visit, with the bath ready to use the following day. We regularly repair Victorian roll-tops, basins & shower trays and cast iron baths, and people most frequently call us about wear marks under the taps and an old resurfacing that’s failing.
Every job is backed for twelve months in Yeldersley and everywhere else. We return to put right any problem with the work.
- Where
- Yeldersley (DE6)
- Area hub
- Derbyshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
About Yeldersley
Yeldersley is about 9 miles west of Belper, in Derbyshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 532 towns and villages across Derbyshire, from the larger towns to small villages. We work right across the region, from Yeldersley to Birmingham (37 miles away).
Here we cover the DE6 postcode area. If you are just outside Yeldersley, we cover Shirley (2 miles south-east), Rodsley (2 miles south), Ednaston (2 miles south-east), Commonside (3 miles south-east) and Brailsford (3 miles south-east). We also work in nearby towns such as Belper (9 miles east), Heanor (14 miles east), Ripley (13 miles east), Langley Mill (15 miles east), Matlock (12 miles north-east) and Upper Midway (15 miles south).
Around Yeldersley
Our customers here include homes close to Church of St Martin, Osmaston CofE (VC) Primary School and The Shoulder of Mutton pub, among other places. Other landmarks nearby include St Oswalds Hospital (2.4 miles north-west) and Ashbourne Rural District (2.3 miles north-west).
Keeping it looking good
Once the work has cured, treat it gently:
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
- Get any chip repaired quickly
- Dry the bath after use to stop limescale
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What we can’t put right
It helps to know what we cannot do:
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we’ll tell you honestly.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Your questions about bath re-enamelling in Yeldersley
What areas do you cover?
Across the UK, and that includes Yeldersley. Prices do not change with location.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you come to Yeldersley?
Yes. We work across the UK and travel to Yeldersley. Send photos and we’ll quote, or call 0345 017 0787.
Places near Yeldersley
Also in Yeldersley
The process
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes most of the day in most cases. The room is left tidy and you’ll know when it can be used.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Clear the area around the damage
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Common problems we fix in Yeldersley
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, typically first under the taps and around the waste.
Keep an eye out for these signs:
- Chips and rust in more than one place
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
What to look for in a quote
- Whether they match the colour on site
- If travel is included in the price
- How soon you can use it again
- What preparation is included
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Prices and what affects them
Prices start from £350. You won’t pay by the hour. The price is based on:
- What the surface is made of
- Access to the area
- Doing more than one item at once
- The type of damage
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- Any details about the material
- Daylight if possible, and no flash reflection
Most clients in Yeldersley get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Repair or replace: which is better?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- Colour-matched on site
- Rooms protected and left tidy
- One visit for most repairs
- Honest advice, even when it means no job
Take a look at our full price list and guide to resurfacing and replacement costs.
Landlords, agents and businesses in Yeldersley
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
