Derbyshire · England
Bath Re-enamelling for Upper Midway homes
Bath re-enamelling for Upper Midway, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
Looking after it afterwards
So the finish stays in good condition for years:
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
- Don’t leave bottles, razors or sponges standing on the surface
- Dry the bath after use to stop limescale
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Bath re-enamelling in Upper Midway without replacing anything
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. We work on Victorian roll-tops, basins & shower trays and acrylic baths, and the jobs we see most are an old resurfacing that’s failing and a dull, rough surface that won’t come clean.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Upper Midway (DE11, DE15)
- County
- Derbyshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Have a window or extractor fan available
- Clear the area around the damage
- Keep pets and children out of the room while we work
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
When we would advise against a repair
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- A bath split right through the body
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Repair or replace: which is better?
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there’s no premium for Upper Midway. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Upper Midway
- Colour mixed on the day to match
- CHAS and Constructionline accredited
- Nothing taken out or refitted
- Rooms protected and left tidy
Read our prices page and resurfacing vs replacement cost guide.
Upper Midway and the surrounding area
Upper Midway is about 1 mile north-east of Swadlincote, in Derbyshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in 532 places in Derbyshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 26 miles away.
We work across DE11 and DE15. We regularly work on streets such as Vale Road, Kings Road and Maple Road. Being close to the A511, Upper Midway is simple for us to get to. We also cover the places around Upper Midway: Midway (1 mile south-east), Lower Midway (1 mile south-east), Swadlincote (1 mile south-west), Newhall (1 mile west) and Stanhope Bretby (1 mile north-west). Within a short drive, we also cover Long Eaton (14 miles north-east), Sandiacre (15 miles north-east), Hilton (7 miles north-west), Measham (6 miles south), Melbourne (6 miles north-east) and Chellaston (8 miles north-east).
Near you in Upper Midway
We visit homes around Chesterfield Arms, The Pingle School and Church of St John. You will also find The Pingle School (0.6 miles south-west) and Elmsleigh Infant and Nursery School (less than half a mile south). For rail, the closest station is Burton-On-Trent station, roughly 3.8 miles west of the centre. Nearby you will also find Bretby Castle (1.4 miles north) and Sharpe's Pottery Museum (0.8 miles south).
Places near Upper Midway
Also in Upper Midway
When to call us in Upper Midway
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
You may need us if you’ve spotted:
- A dull, rough surface that won’t come clean
- An outdated colour you’d like to change
- An old resurfacing that’s failing
- Thin, worn enamel in places
Questions to ask before booking
- Whether they match the colour on site
- What prep work is covered
- What happens if they find more damage
- How the room is protected while they work
Your questions about bath re-enamelling in Upper Midway
Is repairing better than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Are there extra charges for Upper Midway?
No. Our quotes include travel, with the same prices everywhere we work.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you cover Upper Midway?
Yes. We cover the whole UK and come to Upper Midway and the rest of Derbyshire. Send us photos for a fixed quote, or call 0345 017 0787.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Which areas do you work in?
We work UK-wide. Prices do not change with location.
Work for landlords and builders
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
About our accreditations · Every repair comes with a one-year guarantee.
