Rhondda Cynon Taff · Wales
Bath Re-enamelling in Ynysybwl and Coed-y-cwm
Our repair technicians come to Ynysybwl and Coed-y-cwm for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Brown or grey marks that do not clean off
Bath re-enamelling at your home in Ynysybwl and Coed-y-cwm
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. Whether it’s chips and rust in more than one place and worn patches where water runs and sits, we can help, on acrylic baths, cast iron baths and pressed steel baths alike.
Whatever the size of the job, it’s backed by a one-year guarantee in Ynysybwl and Coed-y-cwm and across Rhondda Cynon Taff.
- Where
- Ynysybwl and Coed-y-cwm (CF37)
- Region
- Rhondda Cynon Taff
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. There is no area surcharge for Ynysybwl and Coed-y-cwm. What changes the price is:
- The type of damage
- The size and number of damaged areas
- How easy the damage is to reach
- What the surface is made of
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Photographing the damage takes a minute. Please include:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- Any details about the material
- A coin or ruler next to the damage for scale
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Rhondda Cynon Taff and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Why repair rather than replace?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing normally wins. Prices start from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- Every repair guaranteed for a year
- No need to remove anything
- Most jobs done in one visit
- CHAS and Constructionline accredited
See our prices page or guide to resurfacing and replacement costs.
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
Get a quote
Most clients in Ynysybwl and Coed-y-cwm get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
When to call us in Ynysybwl and Coed-y-cwm
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
People normally call us after spotting something like this:
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
- Wear marks under the taps
- Lots of chips and rust spots
What to look for in a quote
- Whether the colour is mixed to match
- What prep work is covered
- What protection goes down before work starts
- What happens if the damage is worse than the photos show
Your questions about bath re-enamelling in Ynysybwl and Coed-y-cwm
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Are there extra charges for Ynysybwl and Coed-y-cwm?
There is no separate call-out charge. Your fixed price includes everything.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you cover the entire of Rhondda Cynon Taff?
Across the UK, and that includes Ynysybwl and Coed-y-cwm. Prices don’t change with location.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you cover Ynysybwl and Coed-y-cwm?
Yes. We work across the UK and travel to Ynysybwl and Coed-y-cwm. Send photos and we’ll quote, or call 0345 017 0787.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Our work in Ynysybwl and Coed-y-cwm
Ynysybwl and Coed-y-cwm is about 2 miles south of Mountain Ash, in Rhondda Cynon Taff. We travel to homes and businesses in Ynysybwl and Coed-y-cwm and nearby villages, so you don’t need to take anything anywhere. We work in 133 places across Rhondda Cynon Taff, from the larger towns to small villages.
We work across CF37 and the streets around it. Local streets include Clydach Road, Old Ynysbwl Road and Cyncoed. We also travel to Ynysybwl (1 mile south-east), Tyntetown (2 miles north-east), Perthcelyn (2 miles north), Ynysboeth (2 miles north-east) and Penrhiwceiber (2 miles north-east). Larger places within reach include Aberdare (5 miles north-west), Pontypridd (4 miles south-east), Tonypandy (4 miles south-west), Rhondda (4 miles west), Porth (3 miles south-west) and Church Village (6 miles south-east).
Near you in Ynysybwl and Coed-y-cwm
Locally, our jobs take us to homes close to Bethel Calvinistic Methodist Chapel and Old Ynysybwl Inn and the streets around them. Ynysybwl and Coed-y-cwm’s nearest station is Penrhiwceiber station, roughly 1.8 miles north-east of the centre. Nearby you will also find Mountain Ash (2.6 miles north) and Ysbyty Cwm Cynon (2.8 miles north). The countryside around Ynysybwl and Coed-y-cwm includes Y Dduallt and Pwll Waun Cynon.
Nearby places to Ynysybwl and Coed-y-cwm
More services for Ynysybwl and Coed-y-cwm
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
