Essex · England
Bath Repair in Abbess Roding
Chip and crack repairs to enamel, acrylic and cast iron baths in Abbess Roding, carried out at your home and guaranteed for a year.
- Repairs from £95
- Cracks in an acrylic bath
- Chips caused by builders
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
About our bath repair in Abbess Roding
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We regularly repair pressed steel enamel, acrylic and whirlpool & spa baths, and common reasons people contact us are rust by the waste and overflow and a hole punched through by something heavy.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Location
- Abbess Roding (CM5)
- Area hub
- Essex
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Abbess Roding
Abbess Roding is about 7 miles east of Harlow, in Essex. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Abbess Roding is one of 644 places in Essex where we work. Our nearest city page is London, about 25 miles away.
Here we cover the CM5 postcode area. From School Lane and Horsecroft or a nearby road, a technician can come to you. Nearby, we also work in Beauchamp Roding (1 mile south-east), White Roding (1 mile north-west), Manwood Green (2 miles north-west), Norwood End (2 miles south) and Little Laver (2 miles south-west). Further out, we also cover Chelmsford (9 miles east), Braintree (14 miles north-east), Harlow (7 miles west), Brentwood (11 miles south), Billericay (12 miles south-east) and Witham (15 miles east).
Landmarks near Abbess Roding
Around Abbess Roding, we work in homes near Church of St Edmund. Further afield, we also cover the area around Willingale Doe (2.5 miles south-east).
Repair or replace in Abbess Roding?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.
Why us?
- Work done at your home or business
- Fixed prices from your pictures
- CHAS and Constructionline accredited
- Rooms protected and left tidy
Read our prices page and resurfacing vs replacement cost guide.
FAQs for Abbess Roding
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Will the price change on the day?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Do you come to Abbess Roding?
Yes. We work across the UK and travel to Abbess Roding and the rest of Essex. Send pictures and we will quote, or call 0345 017 0787.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Also near Abbess Roding
More services for Abbess Roding
When a repair is not the answer
In fairness, some problems need a different fix:
- Cracks in acrylic we can’t reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a few hours. We tidy up before we leave and tell you when it’s ready to use.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Ensure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
Common problems we fix in Abbess Roding
A cracked acrylic bath usually wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until it cracks.
Keep an eye out for any of the following:
- Chips under the taps
- Impact holes in acrylic
- Chips caused by builders
- Rusty patches near the plughole
Questions to ask before booking
- How your room will be protected
- Whether the price is fixed and includes VAT
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
What bath repair costs
Repairs from £95. We give every job a fixed price from pictures. These are the things that affect it:
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- Unusual colours or finishes
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- The material, if you know it
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Have new chips seen to early
- Don’t scrub with anything abrasive
- Get a dripping tap fixed promptly
- Make sure an acrylic bath is firm underfoot
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
About our accreditations · Every repair comes with a one-year guarantee.
