Cheshire East · England
Bath Repair in Adder's Moss
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Adder's Moss. Send photos for a free, fixed quote.
- Repairs from £95
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
Bath repair in Adder's Moss without replacing anything
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can typically use the bath the next day. Typical jobs include snagging damage from a refit and a cracked acrylic bath, across pressed steel enamel, roll-top & freestanding and cast iron enamel.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Adder's Moss (SK10)
- County
- Cheshire East
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
What happens on the day
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, depending on the damage, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Places near Adder's Moss
Other services in Adder's Moss
What affects the price in Adder's Moss
Prices start from £95. We price every job individually, from your pictures. What matters most is:
- Unusual colours or finishes
- Whether we combine several jobs
- The material
- How many areas need work
We charge the same wherever you are, with no extra for Adder's Moss. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from photos
Phone photos are fine, there is no need for anything special. Just ensure we can see:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- A wider photo showing the whole bath
- Details of any past repairs
For a price in Adder's Moss, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
What we cannot put right
A repair isn’t right for every job, for example:
- Flexing caused by a failed cradle or loose feet
- Rust that has eaten right through a steel bath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why choose Surface Doctor in Adder's Moss
- We leave the room as we found it
- A year’s guarantee on all work
- Same prices wherever you are
- A fixed quote before you book
Take a look at our pricing and resurfacing vs replacement cost guide.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Keep abrasive pads and gritty cleaners away from the bath
- Keep metal cans and razors off the surface
- Rinse it down after each bath
- Have new chips seen to early
There’s nothing special to do after a repair. Avoid bleach-based and gritty cleaners.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
When to call us in Adder's Moss
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
You may need us if you’ve spotted:
- Damage beneath the taps
- Deep scratches in acrylic
- Rust spots around the plughole
- A cracked acrylic bath
Comparing quotes
- What preparation is included
- Whether the price covers travel
- The length of the guarantee and what it covers
- When it can be used again
Common questions in Adder's Moss
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
How do I get a price for bath repair in Adder's Moss?
Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your SK10 postcode.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Our work in Adder's Moss
Adder's Moss is about 3 miles south-east of Wilmslow, in Cheshire East. Jobs in Adder's Moss are booked in like any other job: a fixed price from your photos, then a visit to do the work. Adder's Moss is one of 254 places in Cheshire East we cover. You can also see our page for Manchester, about 13 miles away.
Postcode districts we cover here: SK10. Whether you live on Prestbury Road, School Lane and Macclesfield Road or anywhere nearby, a technician can come to you. Nearby, we also work in Whirley Grove (2 miles south-east), Henbury (2 miles south), Prestbury (2 miles east), Broken Cross (2 miles south-east) and Butley Town (3 miles east). We also work in nearby towns such as Macclesfield (3 miles south-east), Congleton (8 miles south), Wilmslow (3 miles north-west), Knutsford (7 miles west), Middlewich (12 miles south-west) and Sandbach (12 miles south-west).
What’s near Adder's Moss
Around Adder's Moss, we work in homes near The Fallibroome Academy, The Wizard pub and Mottram St Andrew Primary Academy. The nearest railway station is Alderley Edge station, about 2 miles north-west. A little further out are Duke's Court (3.7 miles south-east) and Parkside Hospital (2.4 miles south-east). The countryside around Adder's Moss includes Kerridge Hill and Lindow Common.
About our accreditations · Every repair comes with a one-year guarantee.
