Telford and Wrekin · England
Bath chip & crack repair in Adeney, Telford and Wrekin
Chip and crack repairs to enamel, acrylic and cast iron baths in Adeney, carried out at your home and guaranteed for a year.
- Repairs from £95
- A chipped rim or side
- Holes from dropped items
Bath repair in Adeney, done in place
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. If you’re dealing with scratches you can feel with a fingernail and a hole punched through by something heavy, we can typically put it right.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Adeney (TF10)
- County
- Telford and Wrekin
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
About Adeney
Adeney is about 3 miles west of Newport, in Telford and Wrekin. Across the TF10 area, we come to you. We cover all 79 towns and villages in Telford and Wrekin. We work right across the region, from Adeney to Birmingham (31 miles away).
Our visits in TF10 work the same way as everywhere else we cover. We also cover the places around Adeney: Edgmond (1 mile north-east), Longford (1 mile east), Tibberton (2 miles north-west), Muxton (2 miles south-east) and Lane End (2 miles north-east). Larger places within reach include Telford (5 miles south), Wellington (5 miles south-west), Dawley (7 miles south), Oakengates (5 miles south), Newport (3 miles east) and The Rock (6 miles south).
What’s near Adeney
Around Adeney, we work in homes near Newport Girls' High School and St Peter's Church. The closest station to Adeney is Oakengates station, roughly 4.9 miles south. A little further out are Aqualate Castle (3.9 miles east) and Princess Royal Hospital (4.7 miles south-west). Not far away are Aqualate Mere.
Also in Adeney
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For landlords and businesses
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
How we price bath repair
Repairs from £95. There is no area surcharge for Adeney. What changes the price is:
- The material and finish
- What kind of damage it is
- Whether we combine several jobs
- Unusual colours or finishes
We charge the same wherever you are, so there is no premium for Adeney. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- The material, if you know it
The quickest way to a price is to send two or three photos through our quote form or call us. We will tell you honestly whether it can be repaired.
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.
What you get with us
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
- Every repair guaranteed for a year
- Work done at your home or business
See our pricing or resurfacing vs replacement cost guide.
Adeney questions
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Will there be a smell?
There may be a mild smell during the work.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
What areas do you cover?
The entire UK, including all of Telford and Wrekin. Send your postcode with your photos and we’ll confirm dates.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Looking after it afterwards
It’s all simple stuff:
- A dripping tap stains enamel, so fix it early
- Don’t scrub with anything abrasive
- Keep metal cans and razors off the surface
- Protect the bath with a towel when doing jobs nearby
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Signs you need bath repair in Adeney
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
People generally call us after spotting one of these:
- Scuffs and scratches in the surface
- Chips on the rim or sides
- Holes from dropped items
- Hairline or through cracks in acrylic
What to look for in a quote
- What protection goes down before work starts
- What the guarantee covers, and for how long
- How long it needs to cure
- Whether a trained technician does the job
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which typically takes a few hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the following day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
- Let us know about parking or access
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
