Telford and Wrekin · England
Bath Repair in Edgmond
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Edgmond, with a one-year guarantee on every repair.
- Repairs from £95
- Chips caused by builders
- Holes from dropped items
How we handle bath repair in Edgmond
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. If you are dealing with a hole punched through by something heavy and chips along the edge of the bath, we can usually put it right.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Edgmond (TF10)
- Area hub
- Telford and Wrekin
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Other services in Edgmond
What we’re called out for in Edgmond
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we are called about are:
- Hairline or through cracks in acrylic
- A kit repair that didn’t last
- Chips on the rim or sides
- Rust by the waste and overflow
Comparing quotes
- How the room is protected while they work
- What preparation is included
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
Looking after it afterwards
Nothing complicated is needed:
- Clean with warm water and a mild detergent
- Keep metal cans and razors off the surface
- Make sure an acrylic bath is firm underfoot
- Protect the bath with a towel when doing jobs nearby
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Your questions about bath repair in Edgmond
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Something went through my bath. Can it be fixed?
Normally. Send us a photo of the hole and one from under the bath if you can.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we will ask for another angle.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
What affects the price in Edgmond
Prices start from £95. A fixed quote means you know the cost before you book. We take into account:
- Doing more than one item at once
- What the surface is made of
- How much damage there is
- Any earlier repairs that need removing first
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Send photos for a quote
We price nearly every job from pictures. This is what to send:
- A clear, close picture of the problem area
- A photo taken from further back
- Any details about the material
- Details of any past repairs
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.
Repair or replace in Edgmond?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there is no premium for Edgmond. What changes the price is the job itself: the material, the amount of damage and how many items.
Why us?
- Same prices wherever you are
- Most jobs done in one visit
- One-year guarantee on every repair
- Free fixed quotes from pictures
Take a look at our prices page and guide to resurfacing and replacement costs.
Edgmond and nearby
Edgmond is about 2 miles west of Newport, in Telford and Wrekin. Jobs in Edgmond are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Edgmond is one of 79 towns and villages in Telford and Wrekin we cover. Our jobs stretch from Edgmond to Birmingham (about 30 miles away).
Every address in TF10 is within our area, from the main roads to the quietest streets. Whether you live on High Street, Stackyard Lane and Manor Road or anywhere nearby, a technician can come to you. We also cover the places around Edgmond: Longford (1 mile south-east), Adeney (1 mile south-west), Lane End (1 mile north), Tibberton (3 miles west) and Muxton (3 miles south). We also work in nearby towns such as Telford (6 miles south), Wellington (7 miles south-west), Dawley (8 miles south), Oakengates (6 miles south), The Rock (7 miles south) and Newdale (7 miles south).
Local landmarks in Edgmond
Locally, our jobs take us to homes close to St Peter's Church of England Controlled Primary School, St Peter's Church and Haberdashers' Adams. Well-known places in the area include Princess Royal Hospital (5.9 miles south-west) and Aqualate Castle (2.9 miles east). Green spaces nearby include Aqualate Mere.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
How the visit works
You do not need to empty the room. We bring everything we need with us, put protection down and start once you are happy with the plan. It normally takes a morning or an afternoon, and you are welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the following day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
