Dumfries and Galloway · Scotland
Bath chip & crack repair in Aird, Dumfries and Galloway
We travel to Aird for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- Damage beneath the taps
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
How we handle bath repair in Aird
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. We work on pressed steel enamel, acrylic and cast iron enamel, and the jobs we see most are cracks in an acrylic bath and impact holes in acrylic.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Aird (DG9)
- Area hub
- Dumfries and Galloway
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Aird
Aird is about 2 miles east of Stranraer, in Dumfries and Galloway. Whether you’re in the middle of Aird or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in 138 places in Dumfries and Galloway, from the larger towns to small villages. We work right across the region, from Aird to Glasgow (71 miles away).
Our visits in DG9 are booked in the same way as anywhere else. Close by, we cover Lime Kiln (1 mile south-west), Castle Kennedy (1 mile east), Innermessan (2 miles north-west), Stranraer (2 miles west) and Lochans (3 miles south-west).
Local landmarks in Aird
Our customers here include homes close to Old Parish Church and Burial-ground, among other places. Aird’s nearest station is Stranraer station, about 2.2 miles west of the centre. A little further out are Stranraer Museum (2.3 miles west) and Galloway Community Hospital (2 miles west). For a walk, there’s White Loch.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Cracks in parts of an acrylic bath we can’t get to from below
- A steel bath rusted through
- Leaking fittings, which need a plumber
Send us pictures and we will tell you honestly.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
What bath repair costs
Prices start from £95. We charge the same across the UK, including Aird. The price reflects:
- The type of damage
- The size and number of damaged areas
- How many items we do on one visit
- How easy the damage is to reach
Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what helps:
- What it’s made of, if you know
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
To get a price, send a couple of pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Also in Aird
Common questions in Aird
Can you repair a hole in a bath?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Do you work in Aird?
Yes. We cover the entire UK and come to Aird. Send photos and we will quote, or call 0345 017 0787.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Is a repair better than a new one?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How the visit works
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to a few hours, depending on the damage, tidy-up included.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Advice
When to call us in Aird
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Keep an eye out for these signs:
- An old repair that has yellowed or come loose
- A chip where the taps sit
- Deep scratches in acrylic
- A chipped rim or side
Comparing quotes
- How the colour is matched
- The length of the guarantee and what it covers
- How the room is protected while they work
- Whether the price covers travel
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We carry out planned and one-off repairs for housing associations and facilities teams in Dumfries and Galloway and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Keep metal cans and razors off the surface
- Avoid scourers, wire wool and gritty cream cleaners
- Protect the bath with a towel when doing jobs nearby
- Have new chips seen to early
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
About our accreditations · Every repair comes with a one-year guarantee.
