West Sussex · England

Bath Repair in Albourne Green

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Albourne Green, with a one-year guarantee on every repair.

  • Repairs from £95
  • Chips under the taps
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Albourne Green

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Bath repair at your home in Albourne Green

A damaged bath doesn’t have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. Whether it’s chips on the rim or sides and hairline or through cracks in acrylic, we can usually put it right, on roll-top & freestanding, cast iron enamel and pressed steel enamel alike.

Every repair comes with a one-year guarantee, wherever you are in West Sussex.

Before and after: a chipped, rust-stained bath around the plughole
Where
Albourne Green (BN6)
County
West Sussex
Guarantee
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026

Albourne Green and nearby

Albourne Green is about 4 miles south-west of Burgess Hill, in West Sussex. Clients in Albourne Green get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Albourne Green is one of 371 places in West Sussex where we work. You can also see our page for London, about 39 miles away.

Every address in BN6 is within our area, from the main roads to the quietest streets. From The Street and Barn Close or anywhere nearby, a technician can come to you. Nearby, we also work in Albourne Street (1 mile south), Albourne (1 mile south-west), High Cross (1 mile north-west), Blackstone (1 mile west) and Twineham (2 miles north). Within a short drive, we also cover Crawley (12 miles north), Horsham (10 miles north-west), Worthing (12 miles south-west), Haywards Heath (6 miles north-east), Burgess Hill (4 miles north-east) and Shoreham-by-Sea (8 miles south-west).

Around Albourne Green

Our clients here include homes close to The White Horse Inn, The Parish Church of St Bartholomew and Albourne CofE Primary School, among other places. The closest station to Albourne Green is Hassocks station, roughly 2.6 miles east. Further afield, we also cover the area around The Dene Hospital (2.5 miles north-east) and The Budding Foundation Museum of Gardening (2.3 miles south-east). Green spaces nearby include Wolstonbury Hill and Woods Mill.

Map of Albourne Green © OpenStreetMap contributors

Keeping it looking good

Much of the damage we repair could have been avoided. These habits help:

  • Check that an acrylic bath does not move when you stand in it
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Keep metal cans and razors off the surface
  • Rinse the bath after use, especially in hard water areas

Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

Landlord and trade work in Albourne Green

For anyone letting property in or around Albourne Green, we will quote for several properties at once. Send photos for each one and we’ll price them together.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access.

Different materials, different repairs

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.

Do you need bath repair in Albourne Green?

Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

If you can see any of these, send us a picture:

  • Scuffs and scratches in the surface
  • A chipped rim or side
  • Cracks in an acrylic bath
  • Holes from dropped items

Comparing quotes

  • Whether cleaning and preparation are in the price
  • Whether the colour is mixed to match
  • How to care for the finish
  • Whether a trained technician does the job

How to compare quotes

Common questions in Albourne Green

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can you repair a failed DIY repair?

Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.

How long before I can use the bath?

Typically the next day. We confirm the time before we leave.

What happens next?

We review the pictures and send a fixed quote and the next dates we have.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first.

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

How the visit works

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a few hours, depending on the damage. At the end we talk you through how soon it can be used and how to care for it.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Keep children and pets away from the room on the day
  • Let us know if it has been repaired before

Getting a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a free quote

Advice

Why repair rather than replace?

Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Why book with us

  • One-year guarantee on every repair
  • Rooms protected and left tidy
  • Same prices wherever you are
  • We come to you, anywhere in the UK

Read our full price list and bath cost comparison.

What we can’t put right

In fairness, there are a few things a repair won’t fix:

  • Acrylic cracks with no access behind them
  • A bath worn all over, where resurfacing makes more sense
  • Water coming from the waste or taps rather than the bath

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.