West Sussex · England
Bath chip & crack repair in Blackstone, West Sussex
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Blackstone, with a one-year guarantee on every repair.
- Repairs from £95
- Hairline or through cracks in acrylic
- Rusty patches near the plughole
About our bath repair in Blackstone
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We work on cast iron enamel, acrylic and roll-top & freestanding, and common reasons people get in touch are rusty patches near the plughole and hairline or through cracks in acrylic.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Location
- Blackstone (BN5)
- County
- West Sussex
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Blackstone
Blackstone is about 5 miles west of Burgess Hill, in West Sussex. We visit customers in Blackstone and nearby villages, so there’s no workshop to go to. Our technicians cover 371 places in West Sussex, from the larger towns to small villages. Our jobs stretch from Blackstone to London (about 40 miles away).
Here we cover the BN5 postcode area. We regularly work on streets such as Blackstone Lane and Blackstone Street and the roads around them. We also travel to Woodmancote (1 mile south-west), High Cross (1 mile north-east), Albourne (1 mile east), Albourne Street (1 mile east) and Albourne Green (1 mile east). Within a short drive, we also cover Crawley (13 miles north), Horsham (10 miles north), Worthing (10 miles south-west), Haywards Heath (8 miles north-east), Burgess Hill (5 miles east) and Littlehampton (15 miles south-west).
What’s near Blackstone
Locally, our jobs take us to homes close to The Parish Church of St Bartholomew, among other places. The closest station to Blackstone is Hassocks station, about 3.9 miles east. A little further out are The Dene Hospital (3.8 miles north-east) and The Budding Foundation Museum of Gardening (3.6 miles east). Not far away are Woods Mill and Wolstonbury Hill.
The process
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow a few hours from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Keep children and pets away from the room on the day
- Make sure the area is dry
- Tell us about any previous repairs or coatings
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Advice
Work for landlords and builders
If you manage property in Blackstone, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
How to look after the repair
After the repair has cured, a few habits help it last:
- Avoid scourers, wire wool and gritty cream cleaners
- Check that an acrylic bath does not move when you stand in it
- Rinse the bath after use, especially in hard water areas
- Use a soft cloth and washing-up liquid for everyday cleaning
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
Common problems we fix in Blackstone
A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.
Typical reasons for a call-out include:
- Scuffs and scratches in the surface
- Holes from dropped items
- A cracked acrylic bath
- Snagging damage from a refit
What to look for in a quote
- What prep work is covered
- How changes to the job are handled
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Acrylic cracks with no access behind them
- A steel bath rusted through
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Places near Blackstone
Also in Blackstone
Repair or replace in Blackstone?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place. Repairs from £95, with every job priced individually. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Blackstone clients choose us
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before booking
- Technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
See our pricing or guide to resurfacing and replacement costs.
Questions from Blackstone
Can a cracked acrylic bath be fixed?
Typically, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Something went through my bath. Can it be fixed?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Is a repair better than a new one?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
About our accreditations · Every repair comes with a one-year guarantee.
