Staffordshire · England
Bath chip & crack repair in Alder Moor, Staffordshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Alder Moor and across Staffordshire. Send pictures for a free, fixed quote.
- Repairs from £95
- Rusty patches near the plughole
- Damage done while the bathroom was being fitted
How we price bath repair
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- Any earlier repairs that need removing first
- How many items we do on one visit
- How much damage there is
- The material and finish
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Send pictures for a quote
Most quotes are done from photos alone. To help us price it:
- A clear, close picture of the problem area
- Any details about the material
- Where you are, by postcode
- A picture taken from further back
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Bath repair at your home in Alder Moor
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. Common call-outs are for holes from dropped items and rust by the waste and overflow, across acrylic, whirlpool & spa baths and cast iron enamel.
All our work comes with a one-year guarantee.
- Area
- Alder Moor (DE13)
- Region
- Staffordshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. You can expect it to take a few hours.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the next day.
Before we arrive
- Tell us if there are stairs or a lift
- Clear the area around the damage
- Tell us about parking, stairs or access
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Advice
Our work in Alder Moor
Alder Moor is about 3 miles north-west of Burton upon Trent, in Staffordshire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Alder Moor is one of 512 towns and villages in Staffordshire where we work. Our jobs stretch from Alder Moor to Birmingham (about 27 miles away).
Postcode districts we cover here: DE13. Streets in the area include Fiddler's Lane and Lodge Hill, and we cover them all. If you’re just outside Alder Moor, we cover Rolleston on Dove (1 mile east), Tutbury (1 mile north-west), Anslow (1 mile south-west), Marston on Dove (2 miles north-east) and Horninglow (2 miles south-east). We also work in nearby towns such as Burton upon Trent (3 miles south-east), Tamworth (15 miles south), Lichfield (13 miles south-west), Rugeley (13 miles south-west), Uttoxeter (9 miles north-west) and Stowe (12 miles south-west).
What’s near Alder Moor
In Alder Moor, that means homes near Church of St Mary, The Spread Eagle Public House and The de Ferrers Academy. Nearby too are The de Ferrers Academy (1.3 miles east) and John of Rolleston Primary School (0.9 miles east). The nearest railway station is Tutbury & Hatton station, roughly 1.6 miles north of the centre. A little further out are Tutbury Castle (1.4 miles north-west) and Cooper's Square (3.2 miles south-east).
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Get a dripping tap fixed promptly
- Stick to mild cleaners and a soft cloth
- Don’t scrub with anything abrasive
- Rinse the bath after use, especially in hard water areas
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Honest limits
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Water coming from the waste or taps rather than the bath
- Cracks in acrylic we can’t reach from underneath
- A bath that moves underfoot, until its support is fixed
Send us photos and we’ll tell you honestly.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
Signs you need bath repair in Alder Moor
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
These are the problems we are asked about most:
- Hairline or through cracks in acrylic
- A chip where the taps sit
- Holes from dropped items
- An old repair that has yellowed or come loose
Questions to ask before booking
- A fixed price, and whether VAT is included
- If travel is included in the price
- How changes to the job are handled
- Who will actually do the work
Nearby places to Alder Moor
What else we do in Alder Moor
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Landlord and trade work in Alder Moor
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
Repairing versus replacing in Alder Moor
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why choose Surface Doctor in Alder Moor
- One price list for the entire UK
- One visit for most repairs
- Repair technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
Read our prices page or resurfacing vs replacement cost guide.
Questions from Alder Moor
Is a holed acrylic bath repairable?
Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
How do I get a price for bath repair in Alder Moor?
Prices start from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
About our accreditations · Every repair comes with a one-year guarantee.
