Bath and North East Somerset · England
Bath chip & crack repair in Aldwick, Bath and North East Somerset
Bath repair across Aldwick and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- A kit repair that didn’t last
- Impact holes in acrylic
Should you replace it?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Our bath repair starts from £95. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why Aldwick customers choose us
- Dust sheets down, tidy finish
- One price list for the whole UK
- Every repair guaranteed for a year
- Work done at your home or business
See our full price list or bath cost comparison.
About our bath repair in Aldwick
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in a single visit. Our repair technicians work on whirlpool & spa baths, acrylic and pressed steel enamel, and the jobs we see most are snagging damage from a refit and a chipped rim or side.
All our work is covered by our one-year guarantee.
- Where
- Aldwick (BS40)
- Area hub
- Bath and North East Somerset
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Aldwick
What else we do in Aldwick
Elsewhere in Bath and North East Somerset
Bath Repair in all 136 places in Bath and North East Somerset
Our services in Bath and North East Somerset
Areas we cover
About bath chip & crack repair
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
- Wear across the whole surface, which needs re-enamelling
Send us pictures and we’ll tell you honestly.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What affects the price in Aldwick
Repairs from £95. There is no area surcharge for Aldwick. The price reflects:
- Access to the area
- The material
- Whether we combine several jobs
- How many areas need work
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your photos
You can take the pictures on your phone, there’s no need for anything special. Ensure they show:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- One sharp close-up of the damage
Send us a picture of the damage and one of the entire item, with your BS40 postcode, and we will reply with a fixed price.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
How to look after the repair
So the finish stays in good condition for years:
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath doesn’t move when you stand in it
- Put a towel in the bath if you are working above it
- Give the bath a quick rinse after use
There’s nothing special to do after a repair. Avoid bleach-based and gritty cleaners and rinse after use.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Questions from Aldwick
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
What areas do you cover?
We cover the entire UK, including Aldwick and the rest of Bath and North East Somerset. Send your postcode with your pictures and we will confirm dates.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
The process
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It usually takes two to three hours for most chips, and you can get on with other things while we’re there.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Point us to the nearest place to park
- Ensure the area is dry
- Tell us about parking, stairs or access
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Advice
What we are called out for in Aldwick
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Get in touch if you’ve noticed any of these:
- Chips under the taps
- A failed DIY repair that’s discoloured or lifting
- Scratches you can feel with a fingernail
- Damage done while the bathroom was being fitted
Comparing quotes
- Whether they match the colour on site
- How long the guarantee is and what it covers
- What protection goes down before work starts
- What happens if they find more damage
Aldwick and the surrounding area
Aldwick is about 6 miles south of Nailsea, in Bath and North East Somerset. Jobs in Aldwick are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We cover all 136 towns and villages in Bath and North East Somerset.
Every address in BS40 is covered, from the main roads to the quietest streets. Other places close to Aldwick include Lye Cross (1 mile north), Lye Hole (1 mile north-east), Havyatt Green (1 mile west), Rickford (1 mile south-west) and Burrington (1 mile south-west). Larger places within reach include Keynsham (11 miles north-east), Westmoreland (15 miles east), Kingsmead (15 miles east), Lower Weston (15 miles east), Locksbrook (15 miles east) and Twerton (14 miles east).
Near you in Aldwick
Further afield, we also cover the area around Barrow Hospital (5.7 miles north-east). Green spaces nearby include Black Down.
About our accreditations · Every repair comes with a one-year guarantee.
