County Durham · England
Bath chip & crack repair in Allensford, County Durham
Problem with your bath in Allensford? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Chips under the taps
- A kit repair that didn’t last

When to call us in Allensford
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Keep an eye out for any of the following:
- Deep scratches in acrylic
- Chips along the edge of the bath
- Rust by the waste and overflow
- Damage done while the bathroom was being fitted
Comparing quotes
- What aftercare is recommended
- Whether the colour is mixed to match
- A fixed quote, and whether VAT is included
- If travel is included in the price
About our bath repair in Allensford
Most of our bath repairs take a few hours, and the bath is back in use the day after. You won’t need a plumber or tiler, because the bath doesn’t move. Whether it’s cracks in an acrylic bath and a chipped rim or side, we can help, whatever the material.
Big or small, you get the same one-year guarantee in Allensford and across County Durham.
- Area
- Allensford (DH8)
- Region
- County Durham
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026

Questions from Allensford
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
How much does bath repair cost in Allensford?
Repairs from £95. Every job gets a fixed price from your pictures. Send a close-up and a picture of the whole item with your DH8 postcode.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you’ll get one combined price.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
What happens on the day
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It normally takes two to three hours for most chips, and you can get on with other things while we are there.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
Ask for a price
To get a price, send a couple of photos through our quote form or call us. We’ll say right away whether it can be repaired.
Advice
Covering Allensford
Allensford is about 2 miles west of Consett, in County Durham. Anywhere in DH8, we come to you. Our technicians cover 329 places across County Durham, from the larger towns to small villages. We work right across the region, from Allensford to Newcastle upon Tyne (about 14 miles away).
Our technicians cover all of the DH8 postcode area and the streets around it. We also cover the places around Allensford: The Grove (1 mile east), Castleside (1 mile south), Shotley Grove (1 mile north-east), Bridgehill (1 mile north-east) and Healeyfield (1 mile south). Further out, we also cover Durham (13 miles east), Spennymoor (15 miles south-east), Chester-le-Street (12 miles east), Stanley (8 miles east), Crook (11 miles south-east) and Birtley (13 miles east).
Near you in Allensford
Locally, our jobs take us to homes close to Consett Academy, St. John's Church and Moorside Primary School. Other landmarks nearby include Shotley Bridge Hospital (2.2 miles north-east). For a walk, there is Skaylock Hill.
What affects the price in Allensford
Repairs from £95. Quotes are free and the price is fixed. What we look at:
- Any earlier repairs that need removing first
- What the surface is made of
- The type of damage
- How hard the colour is to match
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
Before you send pictures, a few simple things make all the difference:
- The material, if you know it
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
What a repair can’t fix
To be straight with you, some problems need a different fix:
- A steel bath rusted through
- Cracks in parts of an acrylic bath we cannot get to from below
- Wear across the whole surface, which needs re-enamelling
If in doubt, send pictures and we will say what we think.
Materials we work on in Allensford
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
If you manage property in Allensford, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Keeping it looking good
To keep it looking its best:
- Store metal items away from the bath
- Ensure an acrylic bath is firm underfoot
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Nearby places to Allensford
What else we do in Allensford
Repair or replace: which is better?
People often assume a cracked or chipped bath has to come out. Generally it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Allensford clients choose us
- Straight answers about what a repair can do
- No need to remove anything
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
See our prices page or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.

