Bradford · England

Bath chip & crack repair in Allerton, Bradford

Damaged bath in Allerton? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Chips along the edge of the bath
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Allerton

Different materials, different repairs

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.

Bath repair in Allerton, done in place

A damaged bath does not have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day. Our technicians work on cast iron enamel, roll-top & freestanding and whirlpool & spa baths, and people most often call us about impact holes in acrylic and damage beneath the taps.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Location
Allerton (BD15, BD13, BD8)
Region
Bradford
Cover
One year on every repair
Price
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

Allerton: your questions answered

Is it worth repairing rather than replacing?

Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.

I tried a repair kit. Can you fix it?

Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.

What happens next?

We look at the photos and reply with a fixed quote and some dates. If we need another angle, we’ll ask.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

How much does bath repair cost in Allerton?

Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.

Is my repair covered?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Does someone need to be in?

We need someone to let us in. You do not need to watch us work.

When can you do it?

We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

How it works

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow a few hours, depending on the damage from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Clear toiletries, mats and anything else from around the area
  • Tell us about any previous repairs or coatings

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.

Get a free quote

Related advice

Repair or replace: which is better?

Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.

What you get with us

  • Fixed prices from your photos
  • Nothing taken out or refitted
  • Same prices wherever you are
  • Colour mixed on the day to match

Take a look at our prices page or bath cost comparison.

Where we work around Allerton

Allerton is about 2 miles north-west of Upper Green, in Bradford. Customers in Allerton get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Our technicians cover 140 places across Bradford. You can also see our page for Leeds, about 11 miles away.

Postcode districts we cover here: BD15, BD13 and BD8. Jobs here include addresses on Cote Lane, Avenel Road and Quaver Lane and the roads around them. We also cover the places around Allerton: Sandy Lane (1 mile north-west), Girlington (1 mile east), Egypt (1 mile west), Norr (2 miles north-west) and Wilsden (2 miles north-west). Larger places within reach include Bradford (3 miles east), Keighley (6 miles north-west), Bingley (3 miles north), Shipley (3 miles north-east), Baildon (4 miles north-east) and Wibsey (3 miles south-east).

Near you in Allerton

We visit homes around Ley Top Primary School, Beckfoot Thornton and St Matthew's Church, among other places. For rail, the closest station is Frizinghall station, roughly 2.9 miles north-east of the centre. Well-known places in the area include Colour Experience (2.9 miles east) and Lynfield Mount Hospital (1.2 miles north-east). The countryside around Allerton includes Heaton Reservoir Nature Reserve and Idle Hill.

Map of Allerton © OpenStreetMap contributors

How to look after the repair

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Do not scrub with anything abrasive
  • Do not leave a fresh chip for long
  • Give the bath a quick rinse after use
  • If an acrylic bath flexes, have its feet adjusted

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.

Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.

What affects the price in Allerton

Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:

  • Doing more than one item at once
  • How many areas need work
  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it

The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.

Send pictures for a quote

Two or three clear pictures are normally enough. It helps if you send:

  • Where you are, by postcode
  • A wider photo showing the entire bath
  • Daylight if possible, and no flash reflection
  • Whether it’s been repaired or coated before

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.

Landlord and trade work in Allerton

We work for landlords, letting agents and housing providers in Allerton as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Housing associations and facilities teams use us for planned and reactive repairs in Bradford and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Common problems we fix in Allerton

Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.

You may need us if you’ve spotted:

  • A chip where the taps sit
  • A hole punched through by something heavy
  • A failed DIY repair that’s discoloured or lifting
  • Chips caused by builders

Before you book anyone

  • Who turns up on the day
  • What happens if they find more damage
  • Whether there are any call-out or travel charges
  • What prep work is covered

How to compare quotes

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.