Devon · England

Bath Repair in Alswear

Damaged bath in Alswear? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Rust by the waste and overflow
  • Snagging damage from a refit
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Alswear

DIY repairs versus a professional job

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

How we handle bath repair in Alswear

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Our technicians work on pressed steel enamel, acrylic and roll-top & freestanding, and common reasons people contact us are a kit repair that didn’t last and damage done while the bathroom was being fitted.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Where
Alswear (EX36)
Region
Devon
Warranty
One year on every repair
Price
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Landlords, agents and businesses in Alswear

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

We are used to working with agents and managing companies. Just send pictures, the address and how to get access.

Different materials, different repairs

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.

Questions from Alswear

What happens once I’ve sent pictures?

We review the photos and send a fixed quote.

Can you redo an old repair?

Yes, we do this frequently. We strip it out, deal with any rust and repair it again.

Something went through my bath. Can it be fixed?

In most cases. Send us a picture of the hole and one from under the bath if you can.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Is my repair covered?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

What happens if you find more damage?

The price is fixed for what the photos show. If there is more, we will tell you before starting.

I’m a tenant. Can you help?

Yes. Ask your landlord first, and we can send them the quote if that helps.

How much does bath repair cost in Alswear?

Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.

Honest limits

A repair isn’t right for every job, including:

  • A steel bath rusted through
  • Cracks in parts of an acrylic bath we can’t get to from below
  • Flexing caused by a failed cradle or loose feet

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic

Aftercare tips

To keep it looking its best for years:

  • Protect the bath with a towel when doing jobs nearby
  • Ensure an acrylic bath is firm underfoot
  • Store metal items away from the bath
  • Fix dripping taps early to stop staining and limescale

Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.

Should you replace it?

People often assume a cracked or chipped bath has to come out. In most cases it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Alswear. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why book with us

  • Fixed prices from your pictures
  • Everything repaired in place
  • CHAS, Constructionline and SafeContractor accredited
  • We come to you, anywhere in the UK

Take a look at our prices page and bath cost comparison.

Where we work around Alswear

Alswear is about 12 miles south-east of Barnstaple, in Devon. We travel to customers in Alswear and the surrounding area, so nothing has to leave your home. Our repair technicians cover all 586 towns and villages in Devon, from the larger towns to small villages.

Postcode districts we cover here: EX36. We also cover the places around Alswear: George Nympton (2 miles west), Bishop's Nympton (2 miles north-east), South Molton (2 miles north-west), Meshaw (3 miles south-east) and Newtown (3 miles north-east). Larger places within reach include Barnstaple (12 miles north-west), Crediton (15 miles south-east), Newport (12 miles north-west), Roundswell (13 miles north-west), Pilton (13 miles north-west) and Great Torrington (14 miles west).

Local landmarks in Alswear

Around Alswear, we work in homes near South Molton Community College and Church of St Rumon, among other places. Nearby you will also find South Molton Hospital (2.4 miles north-west).

Map of Alswear © OpenStreetMap contributors

How we price bath repair

Repairs from £95. You will know the full cost before you book. We look at:

  • Whether it’s a chip, crack, burn or wear
  • How much damage there is
  • How easy the damage is to reach
  • Unusual colours or finishes

We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed quote

A couple of clear pictures is all it takes. It helps if you send:

  • A coin beside the damage so we can judge size
  • Any details about the material
  • Your postcode, so we can check dates
  • A close-up of the damage, in focus

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

How it works

Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow a morning or an afternoon. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, generally the next day.

How to prepare

  • Have a window or extractor fan available
  • Avoid using the area for a few hours before we arrive
  • Mention any parking restrictions or tricky access

Getting a price

The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.

Get a fixed price

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.