Wakefield · England

Bath Repair for Altofts homes

Bath repair in Altofts without the cost of replacing. Get a fixed price from your photos, then book a visit.

  • Repairs from £95
  • Holes from dropped items
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Altofts?

Bath repair in Altofts without replacing anything

Most of our bath repairs take a few hours, and the bath is back in use the following day. You will not need a plumber or tiler, because the bath doesn’t move. Typical jobs include scratches you can feel with a fingernail and chips caused by builders, on roll-top & freestanding, whirlpool & spa baths and cast iron enamel.

The work is covered for a year after we finish. Just call us if there is a problem and we will come back.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Area
Altofts (WF6)
County
Wakefield
Cover
12 months on all our work
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

What affects the price in Altofts

Repairs from £95. Quotes are free and the price is fixed. What we take into account:

  • Access to the area
  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off
  • How many areas need work

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

How to get a fixed price

Most quotes are done from photos alone. To help us price it:

  • What it’s made of, if you know
  • One sharp close-up of the damage
  • Whether it’s been repaired or coated before
  • Natural light rather than flash

If you are in Altofts and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Materials and what they mean for the repair

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.

How it works

There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to two to three hours for most chips, including clearing up.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the day after.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Mention any parking restrictions or tricky access
  • Have somewhere for us to park nearby if possible

How to get a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Send photos for a quote

Advice

When to call us in Altofts

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

Signs it’s time to call us include:

  • Chips under the taps
  • An old repair that has yellowed or come loose
  • Deep scratches in acrylic
  • Holes from dropped items

Comparing quotes

  • What aftercare is recommended
  • Who turns up on the day
  • What happens if the damage is worse than the photos show
  • How long it needs to cure

Our hiring checklist

Questions from Altofts

What if the damage is worse than the photos show?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

Is a bath repair permanent?

A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before and we’ll plan for it.

Can I add another job to the visit?

Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.

Can you match an avocado or pink bath?

Yes, coloured baths are no problem. The colour is tinted by hand on the day.

Can you fix rust around the plughole?

Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Honest limits

Before you book, it’s worth knowing the limits:

  • Cracks in acrylic we can’t reach from underneath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding

Altofts and nearby

Altofts is about 1 mile south of Normanton, in Wakefield. We visit clients in Altofts and nearby villages, so nothing has to leave your home. Altofts is one of 101 places in Wakefield we cover. Our nearest city page is Leeds, about 9 miles away.

Postcode districts we cover here: WF6. Jobs here include addresses on High Street, Church Lane and Buckle Lane. Neighbouring places we cover include Goosehill (1 mile south-west), Warmfield (1 mile south-west), New Sharlston (1 mile south), Streethouse (2 miles south) and Kirkthorpe (2 miles south-west). Within a short drive, we also cover Wakefield (4 miles west), Castleford (3 miles north-east), Pontefract (4 miles east), Ossett (7 miles west), South Kirkby and Moorthorpe (8 miles south-east) and South Elmsall (9 miles south-east).

Landmarks near Altofts

Typical jobs here are in homes near The Black Swan pub, All Saints Church and St Wilfrid's Catholic High School & Sixth Form College and the streets around them. There is a railway station in Altofts itself: Normanton station. A little further out are Clarke Hall Educational Museum (2.8 miles west) and Castleford (2.4 miles north-east). Green spaces nearby include St Aidan's and Lemonroyd Lake.

Map of Altofts © OpenStreetMap contributors

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Landlords, letting agents and housing providers in Altofts use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

Why repair rather than replace?

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • CHAS and Constructionline accredited
  • One price list for the whole UK
  • Every repair guaranteed for a year
  • Most jobs done in one visit

Take a look at our full price list or guide to resurfacing and replacement costs.

Keeping it looking good

Looking after the surface is easy, and it makes a real difference:

  • Have new chips seen to early
  • Rinse it down after each bath
  • Store metal items away from the bath
  • Stick to mild cleaners and a soft cloth

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.

Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.