Wakefield · England

Bath Repair in Warmfield

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Warmfield and across Wakefield. Free, fixed quotes from your photos.

  • Repairs from £95
  • Rusty patches near the plughole
  • A chipped rim or side
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Warmfield homes

DIY kit or professional repair?

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Bath repair at your home in Warmfield

A damaged bath doesn’t have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. If you’re dealing with a chipped rim or side and damage done while the bathroom was being fitted, we can help, on cast iron enamel, whirlpool & spa baths and pressed steel enamel alike.

All our work is covered by our one-year guarantee, wherever you are in Wakefield.

Where
Warmfield (WF1)
Area hub
Wakefield
Guarantee
One year on every repair
Quotes
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Should you replace it?

Replacing a fitted bath usually means a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in a single visit. Prices start from £95. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

Why book with us

  • Same prices wherever you are
  • Rooms protected and left tidy
  • Repair technicians who travel to you, UK-wide
  • CHAS and Constructionline accredited

Take a look at our pricing and guide to resurfacing and replacement costs.

Warmfield questions

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Do you work for landlords and businesses?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you come to Warmfield?

We do. We send a technician to Warmfield for every job, with no extra charge for travel.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Can I get a quote without a visit?

Nearly always. If pictures do not show enough, we’ll ask for another angle.

About Warmfield

Warmfield is about 1 mile south-west of Normanton, in Wakefield. From the centre of Warmfield to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Warmfield is one of 101 places in Wakefield we cover. Our jobs stretch from Warmfield to Leeds (10 miles away).

Our visits in WF1 work the same way as everywhere else we cover. Local streets include Croft Head Lane, Warmfield Lane and Elsicker Lane, all of which we cover. Other places close to Warmfield include Goosehill (1 mile north), New Sharlston (1 mile south-east), Kirkthorpe (1 mile west), Horse Race End (1 mile south-west) and Altofts (1 mile north-east). Within a short drive, we also cover Wakefield (3 miles west), Castleford (4 miles north-east), Pontefract (5 miles east), Ossett (6 miles west), South Kirkby and Moorthorpe (8 miles south-east) and South Elmsall (9 miles south-east).

Near you in Warmfield

Typical jobs here are in homes near Church of St Peter, Outwood Academy City Fields and Newlands Primary School, among other places. The nearest railway station is Normanton station, roughly 1.3 miles north of the centre. Other landmarks nearby include Clarke Hall Educational Museum (2.2 miles north-west) and West Riding Pauper Lunatic Asylum (2.3 miles west). Not far away are Lemonroyd Lake and Waterton Park.

Map of Warmfield © OpenStreetMap contributors

Common problems we fix in Warmfield

Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

These are the problems we’re asked about most:

  • Hairline or through cracks in acrylic
  • Chips along the edge of the bath
  • Scuffs and scratches in the surface
  • A hole punched through by something heavy

Comparing quotes

  • What preparation is included
  • A fixed quote, and whether VAT is included
  • Whether the colour is mixed to match
  • What the guarantee covers, and for how long

10 questions to ask before you book

Materials and what they mean for the repair

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.

How we price bath repair

Repairs from £95. A fixed quote means you know the cost before booking. We take into account:

  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes
  • Previous DIY repairs that have to come out
  • Whether we combine several jobs

A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Getting a price from pictures

Before you send pictures, a few simple things make all the difference:

  • A wider photo showing the entire bath
  • Something in shot to show the size
  • Daylight if possible, and no flash reflection
  • Details of any past repairs

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

What we can’t put right

To be straight with you, some problems need a different fix:

  • Water coming from the waste or taps rather than the bath
  • Flexing caused by a failed cradle or loose feet
  • A bath worn all over, where resurfacing makes more sense

Not sure? Send pictures and we’ll give you a straight answer before you book.

Materials we work on in Warmfield

  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths

How to look after the repair

After the repair has cured, a few habits help it last:

  • Stick to mild cleaners and a soft cloth
  • A dripping tap stains enamel, so fix it early
  • Store metal items away from the bath
  • Put a towel in the bath if you’re working above it

There’s nothing special to do after a repair. Skip bleach and gritty creams and rinse after use.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

The process

Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for a morning or an afternoon from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Tell us about parking, stairs or access
  • Mention any earlier repairs or resurfacing

How to get a price

A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.

Get a free quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.