Warwickshire · England
Bath chip & crack repair in Alveston, Warwickshire
Bath repair in and around Alveston: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- A failed DIY repair that is discoloured or lifting
Bath repair in Alveston, done in place
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in a single visit. Whether it’s scratches you can feel with a fingernail and damage done while the bathroom was being fitted, we can generally put it right, on acrylic, roll-top & freestanding and cast iron enamel alike.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Area
- Alveston (CV37)
- Region
- Warwickshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. Allow a few hours, depending on the damage, and we’ll keep you posted as we go.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
Preparing for the visit
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
Ask for a price
If you are in Alveston and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
When we’d advise against a repair
Before you book, it’s worth knowing the limits too:
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
- Cracks in acrylic we cannot reach from underneath
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Alveston
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
Towns and villages near Alveston
More services for Alveston
Prices and what affects them
Prices start from £95. You’ll know the full cost before booking. We take into account:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- What kind of damage it is
- How hard the colour is to match
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
Phone photos are fine. Ensure they show:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Common questions in Alveston
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
What about rust by the waste?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
How much does bath repair cost in Alveston?
Prices start from £95. We give a fixed quote from your photos. Send a close-up and a picture of the entire item and your postcode.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you cover Alveston?
Yes, we do. We send a technician to Alveston for every job, with no extra charge for travel.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Covering Alveston
Alveston is about 2 miles east of Stratford-upon-Avon, in Warwickshire. Whether you’re in the middle of Alveston or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Alveston is one of 324 places in Warwickshire where we work. Our nearest city page is Birmingham, about 21 miles away.
We cover every part of the CV37 postcode area and the streets around it. That includes homes on Avonfields Close, Ferry Lane and Kissing Tree Way and the roads around them. If you are just outside Alveston, we cover Ingon (1 mile north-west), Hampton Lucy (1 mile east), Black Hill (2 miles north), Snitterfield (3 miles north-west) and Heath End (3 miles north). Within a short drive, we also cover Warwick (6 miles north-east), Royal Leamington Spa (8 miles north-east), Leamington Spa (8 miles north-east), Kenilworth (10 miles north), Southam (12 miles east) and Alcester (9 miles west).
Landmarks near Alveston
Around Alveston, we work in homes near Alveston CofE Primary School, King Edward VI School and Church of St James. The nearest railway station is Stratford-upon-Avon station, roughly 2.6 miles west. Nearby you will also find Stratford Motor Museum (2.2 miles west) and Temple Hill (1.6 miles west).
Landlord and trade work in Alveston
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Landlords, letting agents and housing providers in Alveston use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Looking after it afterwards
Aftercare is simple:
- Protect the bath with a towel when doing jobs nearby
- Keep abrasive pads and gritty cleaners away from the bath
- A dripping tap stains enamel, so fix it early
- Give the bath a quick rinse after use
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Alveston customers choose us
- Same prices wherever you are
- No need to remove anything
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
Read our prices page or resurfacing vs replacement cost guide.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
