Lincolnshire · England

Bath chip & crack repair in Ancaster, Lincolnshire

Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Ancaster. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Snagging damage from a refit
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Ancaster?

Bath repair in Ancaster without replacing anything

We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. We regularly repair acrylic, cast iron enamel and pressed steel enamel, and people most frequently call us about chips along the edge of the bath and a hole punched through by something heavy.

You’re covered for a year from the day of the repair. If anything is not right, ring us and we will come back.

Location
Ancaster (NG32)
Area hub
Lincolnshire
Cover
12 months on all our work
Quote
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

What affects the price in Ancaster

Repairs from £95. We give every job a fixed quote from pictures. This is what makes a difference:

  • How hard the colour is to match
  • The material
  • The type of damage
  • Whether old repairs or coatings need taking off

The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.

How to get a fixed quote

It only takes a minute to photograph the damage. Try to send:

  • A photo taken from further back
  • Where you are, by postcode
  • Something in shot to show the size
  • Natural light rather than flash

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.

How the visit works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which typically takes two to three hours for most chips. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Preparing for the visit

  • Let us know about parking or access
  • Make sure the room can be ventilated
  • Move bottles, mats and clutter away from the area

Get a quote

A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a free quote

Related advice

What we’re called out for in Ancaster

Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.

You may need us if you’ve spotted any of these:

  • Rust by the waste and overflow
  • A hole punched through by something heavy
  • Chips along the edge of the bath
  • Snagging damage from a refit

Comparing quotes

  • Whether a trained technician does the job
  • Whether cleaning and preparation are in the price
  • Whether the colour is mixed to match
  • How your room will be protected

10 questions to ask before booking

Common questions in Ancaster

Is repairing better than replacing?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Will the repair last?

Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.

Is there a call-out fee?

We don’t add a call-out fee. Your fixed price includes everything.

Is a holed acrylic bath repairable?

Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.

How much does bath repair cost in Ancaster?

Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.

Keeping it looking good

Looking after the surface is easy:

  • Rinse the bath after use, especially in hard water areas
  • Have new chips seen to early
  • Clean with warm water and a mild detergent
  • Make sure an acrylic bath is firm underfoot

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

Ancaster and the surrounding area

Ancaster is about 5 miles west of Sleaford, in Lincolnshire. Whether you’re in the middle of Ancaster or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Ancaster is one of 732 towns and villages in Lincolnshire we cover. We work right across the region, from Ancaster to Birmingham (67 miles away).

We cover every part of the NG32 postcode area. From Charles Avenue, Mercia Drive and Hillside or anywhere nearby, we can come to you. Close by, we cover Sudbrook (1 mile north-west), Wilsford (1 mile south-east), West Willoughby (1 mile west), Barkston Heath (2 miles south-west) and Kelby (2 miles south-east). Within a short drive, we also cover Grantham (7 miles south-west), Sleaford (5 miles east), North Hykeham (14 miles north), Hykeham (14 miles north), Waddington (13 miles north) and Spittlegate (7 miles south-west).

Local landmarks in Ancaster

Typical jobs here are in homes near Ancaster CofE Primary School, St Martin's Church and Ermine Way pub and the streets around them. Ancaster has its own railway station: Ancaster station. A little further out are Rauceby Hospital (3.4 miles east) and Cranwell Aviation Heritage Museum (3.1 miles north-east).

Map of Ancaster © OpenStreetMap contributors

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.

Why repair rather than replace?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

What you get with us

  • No need to remove anything
  • We leave the room as we found it
  • Normally one visit, start to finish
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our prices page and resurfacing vs replacement cost guide.

Landlords, agents and businesses in Ancaster

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

When a repair isn’t the answer

Before you book, it’s worth knowing the limits too:

  • Rust that has eaten right through a steel bath
  • A bath worn all over, where resurfacing makes more sense
  • Cracks in acrylic we cannot reach from underneath

Not sure? Send pictures and we will give you a straight answer before booking.

What we work on

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.