Lincolnshire · England

Bath and surface repairs in NG32

Based in NG32? Our technicians cover Barrowby, Allington and Ancaster and every street in between, repairing in place.

About bath repair in NG32

We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. Our repair technicians work on roll-top & freestanding, acrylic and cast iron enamel, and common reasons people get in touch are rusty patches near the plughole and hairline or through cracks in acrylic.

When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a morning or an afternoon. We clean up when we’re done and let you know when you can use it again.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

What you will pay

Our bath repair starts from £95. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Why choose Surface Doctor

  • Straight answers about what a repair can do
  • A year’s guarantee on all work
  • No need to remove anything
  • Rooms protected and left tidy

Ask for a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.

Around Barrowby

We visit homes around The West Grantham Academy St Hugh's, White Swan Public House and All Saints Church, among other places. You’ll also find Barrowby Church of England Primary School (within half a mile north-west) and The West Grantham Academy St Hugh's (1.2 miles south-east). Barrowby’s nearest station is Grantham station, about 2 miles east. Nearby you’ll also find Belvoir Castle (4.2 miles west) and Grantham and Kesteven Hospital (2 miles east).

What bath repair costs

Prices start from £95. You will not pay by the hour. The price is based on:

  • The material and finish
  • Access to the area
  • How much damage there is
  • Previous DIY repairs that have to come out

There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your pictures

Phone photos are fine, there is no need for anything special. Ensure they show:

  • Any details about the material
  • One picture of the whole bath
  • A coin beside the damage so we can judge size
  • A clear, close picture of the problem area

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Aftercare tips

Aftercare is simple, and it makes a real difference:

  • Cover the bath during DIY or decorating
  • Clean with warm water and a mild detergent
  • Do not leave a fresh chip for long
  • Don’t scrub with anything abrasive

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.

Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.

Different materials, different repairs

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Common problems we fix in NG32

A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

Get in touch if you’ve noticed any of these:

  • Chips along the edge of the bath
  • Rust by the waste and overflow
  • Chips under the taps
  • Cracks in an acrylic bath

NG32 questions

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you fix rust around the plughole?

Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.

When can I have a bath again?

Most baths can be used the day after. We’ll tell you the exact curing time when we finish.

Will the repair show?

On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

How do I book?

Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.

How much does bath repair cost in NG32?

Prices start from £95. Every job gets a fixed quote from your pictures. Send a close-up and a photo of the whole item and your postcode.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.