Scottish Borders · Scotland
Bath chip & crack repair in Ancrum, Scottish Borders
Our technicians come to Ancrum for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A chipped rim or side
- Snagging damage from a refit
Bath repair in Ancrum, done in place
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. You can typically use the bath the following day. Typical jobs include impact holes in acrylic and damage done while the bathroom was being fitted, across roll-top & freestanding, pressed steel enamel and cast iron enamel.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Ancrum (TD8)
- County
- Scottish Borders
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
Your technician turns up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, and we leave the room as we found it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.
Related advice
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Why repair rather than replace?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. Our prices are the same across the UK, so there’s no premium for Ancrum. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Ancrum
- We’ll tell you if it’s not worth repairing
- Fixed prices from your photos
- We leave the room as we found it
- Typically one visit, start to finish
Read our pricing and resurfacing vs replacement cost guide.
How we price bath repair
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- The material and finish
- Whether we combine several jobs
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
How to get a fixed price
Two or three clear photos are normally enough. It helps if you send:
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- Where you are, by postcode
- The material, if you know it
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
When a repair isn’t the answer
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Wear across the whole surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
Send us photos and we’ll tell you honestly.
Materials we repair
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse the bath after use, especially in hard water areas
- Keep abrasive pads and gritty cleaners away from the bath
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
FAQs for Ancrum
Which areas do you work in?
We cover the whole UK, including Ancrum and the rest of the Scottish Borders. Just include your postcode and we will offer you dates.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
What happens next?
You’ll get a fixed quote back. There is no obligation to book.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Is repairing better than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Our work in Ancrum
Ancrum is about 10 miles north-east of Hawick, in the Scottish Borders. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover 89 places in the Scottish Borders. We work right across the region, from Ancrum to Edinburgh (38 miles away).
Jobs in TD8 work the same way as everywhere else we cover. Local streets include North Myrescroft, Myrescroft Road and West Myrescroft, and we cover them all. If you’re just outside Ancrum, we cover Jedburgh (3 miles south-east), Nisbet (3 miles east), Belses (4 miles west), Maxton (4 miles north) and Greycrook (4 miles north-west). Further out, we also cover Galashiels (11 miles north-west), Hawick (10 miles south-west), Kelso (9 miles north-east), Selkirk (10 miles west), Wilton (10 miles south-west) and Melrose (8 miles north-west).
What’s near Ancrum
Typical jobs here are in homes near Ancrum Old Parish Church and the streets around them. Nearby you will also find Queen Mary's House (2.8 miles south-east) and Timpendean Tower (1.2 miles south). Not far away are Wooden Loch and Peniel Heugh.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
We work for landlords, letting agents and housing providers in Ancrum as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Also in Ancrum
About our accreditations · Every repair comes with a one-year guarantee.
