Coventry · England
Bath chip & crack repair in Ansty, Coventry
Bath repair across Ansty and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- A cracked acrylic bath
- Damage done while the bathroom was being fitted
Questions from Ansty
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Bath repair in Ansty without replacing anything
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, generally in a single visit. Our repair technicians work on acrylic, pressed steel enamel and cast iron enamel, and people most often call us about impact holes in acrylic and a chip where the taps sit.
All of our repairs are guaranteed for twelve months in Ansty and everywhere else. If something goes wrong with the work, we come back.
- Area
- Ansty (CV7)
- County
- Coventry
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
To be straight with you, there are a few things a repair will not fix:
- Cracks in acrylic we cannot reach from underneath
- Leaking fittings, which need a plumber
- A steel bath rusted through
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Ansty
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Do you need bath repair in Ansty?
Rust normally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Most people get in touch after spotting something like this:
- Scuffs and scratches in the surface
- Chips on the rim or sides
- An old repair that has yellowed or come loose
- Hairline or through cracks in acrylic
Before you book anyone
- What aftercare is recommended
- How long the guarantee is and what it covers
- Whether the colour is mixed to match
- A fixed quote, and whether VAT is included
Covering Ansty
Ansty is about 4 miles south-east of Bedworth, in Coventry. Our technicians come to homes and businesses in Ansty and the surrounding area, so you don’t need to take anything anywhere. Ansty is one of 88 towns and villages in Coventry where we work. We work right across the region, from Ansty to Birmingham (about 20 miles away).
Every address in CV7 is covered, from the main roads to the quietest streets. Jobs here include addresses on Main Road, Grove Road and Hinckley Road and the roads around them. Being close to the B4029, Ansty is easy for our repair technicians to reach. Neighbouring places we cover include Shilton (1 mile north), Barnacle (1 mile north-west), Potters Green (2 miles south-west), Bulkington (2 miles north) and Wood End (2 miles west). Further out, we also cover Coventry (4 miles south-west), Hillfields (4 miles south-west), Bishopsgate Green (4 miles south-west), Radford (5 miles south-west), Ernesford Grange (4 miles south-west) and Bell Green (3 miles south-west).
Landmarks near Ansty
Locally, our jobs take us to homes close to Grace Academy, Church of St James and The Shilton Arms and the streets around them. The nearest railway station is Bedworth station, roughly 3.1 miles north-west. Other landmarks nearby include Caludon Castle (2.6 miles south-west) and H M Prison Service Museum (3.9 miles south-east).
Towns and villages near Ansty
Other services in Ansty
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What affects the price in Ansty
Prices start from £95. We price every job individually. The main factors are:
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- The material and finish
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
Phone pictures are fine. Ensure they show:
- Details of any past repairs
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Natural light rather than flash
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
How to care for the repair
Looking after the surface is easy:
- Get a dripping tap fixed promptly
- Check that an acrylic bath does not move when you stand in it
- Keep metal cans and razors off the surface
- Protect the bath with a towel when doing jobs nearby
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours, depending on the damage. If we find something your pictures didn’t show, we will explain it before carrying on.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the following day.
Preparing for the visit
- Clear the area around the damage
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
Get a quote
The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Advice
Landlord and trade work in Ansty
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
