Coventry · England
Bath re-enamelling & resurfacing in Ansty, Coventry
Bath re-enamelling in Ansty without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
Bath re-enamelling in Ansty, done in place
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It generally takes one visit, and can be used again the day after. We regularly repair Victorian roll-tops, pressed steel baths and acrylic baths, and people most often call us about staining under the taps and around the waste and wear marks under the taps.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Ansty (CV7)
- County
- Coventry
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. The price reflects the work involved, not where you live. You will see the full price before booking.
Why us?
- Fixed prices from your pictures
- One-year guarantee on every repair
- CHAS and Constructionline accredited
- Same prices wherever you are
Read our prices page or guide to resurfacing and replacement costs.
Landlords, agents and businesses in Ansty
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Common questions in Ansty
Are there extra charges for Ansty?
Travel is included in the price, with the same prices everywhere we work.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you work in Ansty?
Yes, we do. Repair technicians travel to Ansty from across the region, with no extra charge for travel.
Can you redo someone else’s repair?
Typically, yes. The old repair comes out first, so mention it when you send pictures.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
What areas do you cover?
Across the UK, and that includes Ansty. Our prices are the same everywhere.
What happens on the day
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Clear the area around the damage
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
Ansty and nearby
Ansty is about 4 miles south-east of Bedworth, in Coventry. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Our repair technicians cover 88 places across Coventry. We work right across the region, from Ansty to Birmingham (about 20 miles away).
We cover every part of CV7. You’ll find streets such as Main Road, Grove Road and Hinckley Road, all of which we cover. You’ll find Ansty on the B4029, so it’s easy for us to reach. If you’re just outside Ansty, we cover Shilton (1 mile north), Barnacle (1 mile north-west), Potters Green (2 miles south-west), Bulkington (2 miles north) and Wood End (2 miles west). Further out, we also cover Coventry (4 miles south-west), Hillfields (4 miles south-west), Bishopsgate Green (4 miles south-west), Radford (5 miles south-west), Ernesford Grange (4 miles south-west) and Bell Green (3 miles south-west).
Landmarks near Ansty
Around Ansty, we work in homes near Grace Academy, Church of St James and The Shilton Arms and the streets around them. For rail, the closest station is Bedworth station, about 3.1 miles north-west. Further afield, we also cover the area around Caludon Castle (2.6 miles south-west) and H M Prison Service Museum (3.9 miles south-east).
Keeping it looking good
After the repair has cured, a few habits help it last:
- Never use suction bath mats
- A dripping tap should be fixed promptly
- Store bottles off the bath
- A quick wipe after use keeps limescale away
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Do you need bath re-enamelling in Ansty?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Customers usually contact us about:
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Chips and rust in more than one place
Comparing quotes
- Who turns up on the day
- How long the guarantee is and what it covers
- Whether the price covers travel
- Whether cleaning and preparation are in the price
What else we do in Ansty
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- How easy the damage is to reach
- What the surface is made of
- Doing more than one item at once
- How many areas need work
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- Any details about the material
- One picture of the whole bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
