North Ayrshire · Scotland
Bath Repair for Ardeer homes
Fixed-price bath repair in Ardeer and the surrounding area, typically in one visit and guaranteed for a year.
- Repairs from £95
- Deep scratches in acrylic
- Chips along the edge of the bath
About our bath repair in Ardeer
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. We’re frequently asked to fix a chipped rim or side and damage beneath the taps, on pressed steel enamel, whirlpool & spa baths and acrylic.
A one-year guarantee comes as standard.
- Where
- Ardeer (KA20)
- Area hub
- North Ayrshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Prices start from £95. Prices are worked out job by job. The main factors are:
- Unusual colours or finishes
- Where the damage is and how we get to it
- Doing more than one item at once
- The material
A repair is priced on what needs doing, not where you live. You will see the full price before you book.
Quotes from your pictures
You can generally get a fixed quote without us visiting. To help us price it:
- Natural light rather than flash
- A close-up of the damage, in focus
- Any details about the material
- A photo taken from further back
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Do you need bath repair in Ardeer?
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
It’s worth getting a quote if you see:
- Chips under the taps
- Scratches you can feel with a fingernail
- Impact holes in acrylic
- A chipped rim or side
Before you book anyone
- When it can be used again
- Who will actually do the work
- If travel is included in the price
- Aftercare advice
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Questions from Ardeer
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Do you cover the whole of North Ayrshire?
The whole UK, including all of North Ayrshire. Just include your postcode and we’ll offer you dates.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Where we work around Ardeer
Ardeer is about 1 mile south-east of Stevenston, in North Ayrshire. Across the KA20 area, we carry out the work at your property. We work in 53 places in North Ayrshire. You can also see our page for Glasgow, about 24 miles away.
Our technicians cover all of KA20. Jobs here include addresses on Shore Road, Golf Avenue and Garven Road. We also travel to Stevenston (1 mile north-west), Auchenharvie (2 miles north-west), Kilwinning (2 miles north-east), Saltcoats (2 miles north-west) and Girdle Toll (3 miles east). Further out, we also cover Irvine (3 miles east), Largs (13 miles north-west), Ardrossan (3 miles north-west), Kilbirnie (9 miles north), West Kilbride (7 miles north-west) and Beith (9 miles north-east).
Local landmarks in Ardeer
Around Ardeer, we work in homes near Glencairn Primary School, Ardeer Church Of Scotland and Stevenston Beach and the streets around them. Ardeer’s nearest station is Stevenston station, roughly 0.9 miles north-west. Further afield, we also cover the area around Kerelaw Castle (1.7 miles north-west) and Woodland View (2.1 miles east). The countryside around Ardeer includes Stevenston Loch.
Why repair rather than replace?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- We come to you, anywhere in the UK
- Most jobs done in one visit
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
Take a look at our prices page and bath cost comparison.
Landlords, agents and businesses in Ardeer
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams in North Ayrshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
How it works
We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, and we leave the room as we found it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Make sure the area is dry
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
Places near Ardeer
More services for Ardeer
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
- Acrylic cracks with no access behind them
Send us pictures and we will tell you honestly.
Materials we work on in Ardeer
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
